|
Some of these posts are very old and might contain outdated information. You may wish to search for newer posts instead.
|
Moabfighter
Tam Fighter


Registered: 12/13/15
Posts: 2,710
|
Jiggler isn't rocking on PC
#23516264 - 08/06/16 03:16 PM (7 years, 5 months ago) |
|
|
Hello. Never used a PC before. Have a small cheap 8qt one. I put the black part screwed on tight onto the silver part in the middle of the PC. Small drops of water are coming out of the bottom of the sliver piece, but nothing is "rocking"
If I lift the black piece it lifts the silver piece and shoots a lot of extremely hot steam out. Have the burner on 6 and a half. I can hear the water rolling. But the juggler sure isn't jiggling. Do I loosen the black piece? I thought I read to screw it on tight.
-------------------- KSSS And PE WBS.
|
Moabfighter
Tam Fighter


Registered: 12/13/15
Posts: 2,710
|
Re: Jiggler isn't rocking on PC [Re: Moabfighter]
#23516269 - 08/06/16 03:18 PM (7 years, 5 months ago) |
|
|
I'm an idiot. Literally as soon as I clicked submit. It started rocking. Sorry. Can delete if you want it off the front page.
Now that it's rocking, time 90 minutes? Or should I do 120 minutes to be sure?
-------------------- KSSS And PE WBS.
|
tombosley8
Full on... Bossley Baggins



Registered: 10/14/13
Posts: 3,660
Last seen: 8 months, 4 hours
|
Re: Jiggler isn't rocking on PC [Re: Moabfighter]
#23516410 - 08/06/16 04:31 PM (7 years, 5 months ago) |
|
|
what are you sterilizing?
and the rocker just needs to barely to rock to be at desired pressure and not let out too much steam thus losing water in the pc.
--------------------
Edited by tombosley8 (08/06/16 04:32 PM)
|
2shoes
The anti-agar



Registered: 04/07/11
Posts: 3,124
Loc: Not in a SAB
|
Re: Jiggler isn't rocking on PC [Re: tombosley8]
#23516630 - 08/06/16 05:46 PM (7 years, 5 months ago) |
|
|
Did you put the rocker on after the water inside was boiling for a little bit?
|
dankington
The Stranger




Registered: 03/14/15
Posts: 4,577
Loc: 8te
|
Re: Jiggler isn't rocking on PC [Re: 2shoes]
#23516777 - 08/06/16 06:46 PM (7 years, 5 months ago) |
|
|
Quote:
2shoes said: Did you put the rocker on after the water inside was boiling for a little bit?
I was thinking this too. You did remember to vent the PC for a while before adding the weight, right?
|
2shoes
The anti-agar



Registered: 04/07/11
Posts: 3,124
Loc: Not in a SAB
|
Re: Jiggler isn't rocking on PC [Re: dankington]
#23516782 - 08/06/16 06:49 PM (7 years, 5 months ago) |
|
|
Right. Wait till steam is blowing out then put the rocker on.
|
2shoes
The anti-agar



Registered: 04/07/11
Posts: 3,124
Loc: Not in a SAB
|
Re: Jiggler isn't rocking on PC [Re: 2shoes]
#23516785 - 08/06/16 06:54 PM (7 years, 5 months ago) |
|
|
Turn off heat at 90 and let the PC naturally cool.
|
BaronVonBud
Stranger

Registered: 07/14/16
Posts: 143
Last seen: 7 years, 3 months
|
Re: Jiggler isn't rocking on PC [Re: 2shoes]
#23516818 - 08/06/16 07:09 PM (7 years, 5 months ago) |
|
|
If it's the cheap 8qt from Walmart u keep the rocker on from the start it vents out if the hole on the handle. When it's ready that hole seals up and about 10 min later it rocks Not all work like a AA
Edited by BaronVonBud (08/06/16 07:11 PM)
|
BaronVonBud
Stranger

Registered: 07/14/16
Posts: 143
Last seen: 7 years, 3 months
|
Re: Jiggler isn't rocking on PC [Re: BaronVonBud]
#23516828 - 08/06/16 07:13 PM (7 years, 5 months ago) |
|
|
read the directions that came with the PC before burning yourself really bad
-------------------- <iframe src="//giphy.com/embed/Z7TvUbQHuFdBu" width="480" height="352" frameBorder="0" class="giphy-embed" allowFullScreen></iframe><p><a href="http://giphy.com/gifs/rock-flag-eagle-Z7TvUbQHuFdBu">via GIPHY</a></p>
|
Moabfighter
Tam Fighter


Registered: 12/13/15
Posts: 2,710
|
Re: Jiggler isn't rocking on PC [Re: BaronVonBud]
#23517396 - 08/06/16 11:17 PM (7 years, 5 months ago) |
|
|
Quote:
BaronVonBud said: If it's the cheap 8qt from Walmart u keep the rocker on from the start it vents out if the hole on the handle. When it's ready that hole seals up and about 10 min later it rocks Not all work like a AA
Yes once it's ready it shoots a safety pin up so the lid won't come off until pressure is released. I started my timer once it locked for 90-100 mins.
-------------------- KSSS And PE WBS.
|
BaronVonBud
Stranger

Registered: 07/14/16
Posts: 143
Last seen: 7 years, 3 months
|
Re: Jiggler isn't rocking on PC [Re: Moabfighter]
#23518561 - 08/07/16 11:29 AM (7 years, 5 months ago) |
|
|
Set the timer once the rocker rocks. The safety plug seals up way before 15psi Phillipee Richards brand ?
-------------------- <iframe src="//giphy.com/embed/Z7TvUbQHuFdBu" width="480" height="352" frameBorder="0" class="giphy-embed" allowFullScreen></iframe><p><a href="http://giphy.com/gifs/rock-flag-eagle-Z7TvUbQHuFdBu">via GIPHY</a></p>
Edited by BaronVonBud (08/07/16 11:30 AM)
|
|
|
You cannot start new topics / You cannot reply to topics HTML is disabled / BBCode is enabled
Moderator: Shroomism, george castanza, RogerRabbit, veggie, mushboy, fahtster, LogicaL Chaos, 13shrooms, Stipe-n Cap, Pastywhyte, bodhisatta, Tormato, Land Trout, A.k.a 267 topic views. 26 members, 265 guests and 50 web crawlers are browsing this forum.
[ Show Images Only | Sort by Score | Print Topic ] |
|