|
Some of these posts are very old and might contain outdated information. You may wish to search for newer posts instead.
|
circles

Registered: 06/15/16
Posts: 344
|
All American parts suitable for Fillery Cooker?
#23421574 - 07/07/16 09:20 PM (7 years, 6 months ago) |
|
|
I recently scored this Fillery pressure cooker for about US$70. Now I wonder if the clamp bolts and bakelite knobs are the same as All American parts. One of the bolts got a damaged thread and I like to replace it eventually. It's still ok for now though.
Also in the manual the pressure is referred to as "lbs"....thats the same as "psi", right?


Cheers!
|
CosmoKramer
The Assman

Registered: 06/22/16
Posts: 555
|
Re: All American parts suitable for Fillery Cooker? [Re: circles]
#23421820 - 07/07/16 10:47 PM (7 years, 6 months ago) |
|
|
Not sure about the interchangeable parts, but yes the lbs is the same as psi on a PC. Psi=pounds per square inch.
-------------------- "Get yourself some vitamin C with rose hips and bioflavonoids."
|
tump
ban the undead



Registered: 03/17/16
Posts: 2,383
Last seen: 6 years, 10 months
|
Re: All American parts suitable for Fillery Cooker? [Re: circles]
#23421828 - 07/07/16 10:51 PM (7 years, 6 months ago) |
|
|
Not the same parts. I broke my dads pressure cooker when i was 12 by changing out the parts wrong. Remember to lube it between runs
|
circles

Registered: 06/15/16
Posts: 344
|
Re: All American parts suitable for Fillery Cooker? [Re: circles]
#23421908 - 07/07/16 11:23 PM (7 years, 6 months ago) |
|
|
Thanks guys!
|
Gr0wer
always improving



Registered: 09/16/03
Posts: 6,056
Loc: El Paso, TX
Last seen: 5 years, 10 months
|
Re: All American parts suitable for Fillery Cooker? [Re: circles]
#23421917 - 07/07/16 11:28 PM (7 years, 6 months ago) |
|
|
How bad are the threads? Might be able to file it out.
|
circles

Registered: 06/15/16
Posts: 344
|
Re: All American parts suitable for Fillery Cooker? [Re: circles]
#23422078 - 07/08/16 01:06 AM (7 years, 6 months ago) |
|
|
its only one of the bolts that is a bit doggy. approx. 1/3 of the thread on this is buggered, the rest of it is ok.
I took some measures of the bolt (metric only sorry), some might be out by a fraction but haven't had a caliper handy. Would be awesome if someone could check if they are different to AA equivalent:
over all length: 45mm
thread length: 25mm
length thicker part of bolt: 20mm
diameter thread: ~9mm
diameter thicker part of bolt: ~12.5mm
diameter clamp bolt pin: ~4.5mm
distance bottom of bolt to middle of clamp bolt pin: ~7mm
Pic with measurments:
Edited by circles (07/08/16 01:08 AM)
|
CosmoKramer
The Assman

Registered: 06/22/16
Posts: 555
|
Re: All American parts suitable for Fillery Cooker? [Re: circles]
#23422833 - 07/08/16 09:11 AM (7 years, 6 months ago) |
|
|
If it isn't replaceable through parts from a different PC, you could always take the bolt to a machine shop and have them thread one to spec for you. Might cost $20-30 or whatever they charge these days.
-------------------- "Get yourself some vitamin C with rose hips and bioflavonoids."
|
foragedfungus



Registered: 09/30/13
Posts: 1,849
Loc: out there
|
Re: All American parts suitable for Fillery Cooker? [Re: CosmoKramer]
#23423071 - 07/08/16 10:27 AM (7 years, 6 months ago) |
|
|
Looks like it's the same size as the bolts on both of my AA sterilizers.
|
Gr0wer
always improving



Registered: 09/16/03
Posts: 6,056
Loc: El Paso, TX
Last seen: 5 years, 10 months
|
Re: All American parts suitable for Fillery Cooker? [Re: foragedfungus]
#23423560 - 07/08/16 01:05 PM (7 years, 6 months ago) |
|
|
On my AA941 got 9.25mm thread width and 45.40 length. I'm willing to be AA parts will work.
|
circles

Registered: 06/15/16
Posts: 344
|
Re: All American parts suitable for Fillery Cooker? [Re: Gr0wer]
#23425217 - 07/08/16 11:24 PM (7 years, 6 months ago) |
|
|
Oh cool, thanks, that's great. So i might order a bolt and knob from AA. That will be less of a hassle then finding a person to make one for me.
|
|
|
You cannot start new topics / You cannot reply to topics HTML is disabled / BBCode is enabled
Moderator: Shroomism, george castanza, RogerRabbit, veggie, mushboy, fahtster, LogicaL Chaos, 13shrooms, Stipe-n Cap, Pastywhyte, bodhisatta, Tormato, Land Trout, A.k.a 651 topic views. 37 members, 349 guests and 143 web crawlers are browsing this forum.
[ Show Images Only | Sort by Score | Print Topic ] |
|