Home | Community | Message Board

Kratom Eye
This site includes paid links. Please support our sponsors.


Welcome to the Shroomery Message Board! You are experiencing a small sample of what the site has to offer. Please login or register to post messages and view our exclusive members-only content. You'll gain access to additional forums, file attachments, board customizations, encrypted private messages, and much more!

Shop: Mushroom-Hut Liquid Cultures   Left Coast Kratom Buy Kratom Extract   PhytoExtractum Maeng Da Thai Kratom Leaf Powder   North Spore Injection Grain Bag

Jump to first unread post Pages: < Back | 1 | 2  [ show all ]
Some of these posts are very old and might contain outdated information. You may wish to search for newer posts instead.
Invisiblewowimflabbergasted
supercalifragilistic
 User Gallery


Registered: 07/16/12
Posts: 18,918
Re: Spores are stressing me out man... [Re: SublimeLBC]
    #21701407 - 05/20/15 07:28 AM (8 years, 8 months ago)

Quote:

SublimeLBC said:
Listen to PussyFart! He is the RR of our generation!!



:canthelpbutlaugh:


--------------------
TempMail | TempPMs
My Guide | MJ Grows



Extras: Filter Print Post Top
OfflinePussyFart
Retired Cultivation Extrodinaire
Male


Registered: 04/08/12
Posts: 22,502
Loc: Orbiting Earth
Last seen: 17 days, 20 hours
Trusted Cultivator
Re: Spores are stressing me out man... [Re: wowimflabbergasted]
    #21701690 - 05/20/15 09:07 AM (8 years, 8 months ago)

Yea, that was kind of funny lol.


Extras: Filter Print Post Top
InvisibleJuiceh
Dabbing All Day
 User Gallery


Registered: 09/25/12
Posts: 3,208
Re: Spores are stressing me out man... [Re: PussyFart]
    #21701786 - 05/20/15 09:48 AM (8 years, 8 months ago)

Quote:

PussyFart said:
That video is terrible.....



I like how everything he put in front of his flowhood was actually like 3 inches under the flow of air due to the thick ass frame of his flowhood... Watching that video made me do some serious :smbfacepalm: there were just so many things done wrong.

LOL! Here is a spore syringe video that may be even worse!!



--------------------
Trade List

How I make 15 lbs of casing in a 941. How I line 12 shoeboxes with 1 39gal bag. How I Deep Fry Cubes!
RogerRabbit said:You need a bigger pressure cooker for this hobby. RR


Edited by Juiceh (05/20/15 09:59 AM)


Extras: Filter Print Post Top
Invisibleoregon.trailboy
OTB
Male User Gallery


Registered: 12/15/14
Posts: 1,641
Loc: Oregon
Re: Spores are stressing me out man... [Re: PussyFart]
    #21727247 - 05/27/15 01:56 AM (8 years, 8 months ago)

Quote:

PussyFart said:
Quote:

oregon.trailboy said:
Spore Syringe video

hope this video link helps and I use the chisel blade type for the exacto. the blade almost looks like a really thin flat head screwdriver. works great.





That video is terrible.....the shot glass and all the tools used should have been sterilized....not sanitized with an unsterile substance.......secondly he scraped off 1000x more spores than actually needed, making the syringe extremely dark, then said much less spores should have been used.....well how much less exactly? Don't know, because he didn't say.....Is all that sucking up and expunging the spores neccesary? No. Not at all.  If I was a noob watching that video, I would be left with more questions than answers.....just sayin

He also flame sterilized the needle, then wiped it with alcohol.....

Wiping a flame sterilized tool with an unsterile substance like alcohol is like wiping shit on your face after a shower.

He used a blade when a loop should have been used......I can keep going but it's getting redundant....lol




I found a better spore syringe making in the amu thread by theshroomy1 hope this is better pf :shrug:


Extras: Filter Print Post Top
Invisibleoontribe
Male User Gallery
Registered: 01/14/15
Posts: 3,570
Re: Spores are stressing me out man... [Re: oregon.trailboy]
    #21727322 - 05/27/15 03:20 AM (8 years, 8 months ago)

what about RR video?


Extras: Filter Print Post Top
Invisiblemeowshroom
EnergyPermeation
 User Gallery
Registered: 04/28/15
Posts: 158
Re: Spores are stressing me out man... [Re: oontribe]
    #21727867 - 05/27/15 09:08 AM (8 years, 8 months ago)

Just a slight deviation from the standard....



- take a cap that has been hopefully not exposed to much

- get a square of foil and heat that sucker up...  A lighter would do the trick nicely.

- put cap on foil after cooled - cover with a sterilized glass - wait a day for print.

- boil some water (bottled RO water seems like it would be 'right')
---- make sure this water is covered until cool - maybe microwave the water and cover with seran wrap?

- get a medical 10cc syringe - not hard to get, and are pre-wrapped.

- suck up some of the sterilized water into the syringe

- push out 3 or so drops of water from the syringe onto the print

- stir it around with the tip of the syringe... you should be able then suck up all of the spores.



This method hasn't knocked up anything yet.  Dunno if it's contaminant free, but sterile tech was used, so this could be an alternative method.

The only worry is if there is more than spores being on the spore print.  You'll be stirring those around with the tip of the sterile syringe and pulling everything up.


What do you guys think?  Just a slight adaptation from the norm, basically to not have to mess with an exacto knife.  Just one more thing to contaminate the rig.

Feel free to delete this, move it, molest it, insult it, etc.  I won't take it personally.  :smile:


--------------------


Extras: Filter Print Post Top
Invisiblepaperbackwriter
Edward Lear


Registered: 03/31/14
Posts: 1,888
Re: Spores are stressing me out man... [Re: meowshroom]
    #21728007 - 05/27/15 09:49 AM (8 years, 8 months ago)

Boiling water won't sterilize it as the temp never gets over 212f.

Foil is sterile until something lands on it.

Seems easier and better to just scrape some spores onto agar rather than messing around with syringes.


--------------------
Why should we strive with cynic frown
To knock their fairy castles down?  ~ Eliza Cook

It's rather embarrassing to have given one's entire life to pondering the human predicament and to find that in the end one has little more to say than, 'Try to be a little kinder.' ~Aldous Huxley


Extras: Filter Print Post Top
OfflineSublimeLBC
dab master
 User Gallery


Registered: 10/22/04
Posts: 618
Loc: inside your mother
Last seen: 4 years, 9 months
Re: Spores are stressing me out man... [Re: paperbackwriter]
    #21728318 - 05/27/15 11:16 AM (8 years, 8 months ago)

Quote:

paperbackwriter said:

Seems easier and better to just scrape some spores onto agar rather than messing around with syringes.



I see advantages to both.


--------------------
:earlycuyler:


Extras: Filter Print Post Top
OfflineAchillita
Back to the basics
Male


Registered: 05/26/14
Posts: 4,565
Last seen: 3 years, 10 days
Re: Spores are stressing me out man... [Re: meowshroom]
    #21728348 - 05/27/15 11:24 AM (8 years, 8 months ago)

Quote:

meowshroom said:
Just a slight deviation from the standard....



- take a cap that has been hopefully not exposed to much

- get a square of foil and heat that sucker up...  A lighter would do the trick nicely.

- put cap on foil after cooled - cover with a sterilized glass - wait a day for print.

- boil some water (bottled RO water seems like it would be 'right')
---- make sure this water is covered until cool - maybe microwave the water and cover with seran wrap?

- get a medical 10cc syringe - not hard to get, and are pre-wrapped.

- suck up some of the sterilized water into the syringe

- push out 3 or so drops of water from the syringe onto the print

- stir it around with the tip of the syringe... you should be able then suck up all of the spores.



This method hasn't knocked up anything yet.  Dunno if it's contaminant free, but sterile tech was used, so this could be an alternative method.

The only worry is if there is more than spores being on the spore print.  You'll be stirring those around with the tip of the sterile syringe and pulling everything up.


What do you guys think?  Just a slight adaptation from the norm, basically to not have to mess with an exacto knife.  Just one more thing to contaminate the rig.

Feel free to delete this, move it, molest it, insult it, etc.  I won't take it personally.  :smile:



That actually sounds like a cool way to do a spore syringe. I put the spores on agar, but I'm gonna keep this in mind for any spore syringes I make in the future!


--------------------


Extras: Filter Print Post Top
Jump to top Pages: < Back | 1 | 2  [ show all ]

Shop: Mushroom-Hut Liquid Cultures   Left Coast Kratom Buy Kratom Extract   PhytoExtractum Maeng Da Thai Kratom Leaf Powder   North Spore Injection Grain Bag


Similar ThreadsPosterViewsRepliesLast post
* Flame spore print before using? tekramrepus 2,512 10 09/23/02 02:41 PM
by mickey_rourke
* wasted spores Blu Spore 2,982 3 02/22/19 10:59 AM
by LosTresOjos
* Re: Spore Price Comparison spores 5,039 16 07/27/00 12:46 PM
by Mycelium5150
* Need advice on sterility & trading spores. The_Gnome_King 4,359 16 06/25/20 05:22 AM
by Zakkery
* Making Spore Syringes Anonymous 7,245 13 09/04/02 08:14 PM
by Sammy
* Unsterilized syringe water? them_26 690 4 06/05/01 06:29 PM
by them_26
* How do you use spore prints efficently? dnkyrhubarb 20,059 14 03/03/22 04:07 PM
by Schtarker
* Growing in unsterile environments??? filthysock 1,586 6 03/03/04 08:31 AM
by peruvian spark

Extra information
You cannot start new topics / You cannot reply to topics
HTML is disabled / BBCode is enabled
Moderator: Shroomism, george castanza, RogerRabbit, veggie, mushboy, fahtster, LogicaL Chaos, 13shrooms, Stipe-n Cap, Pastywhyte, bodhisatta, Tormato, Land Trout, A.k.a
2,506 topic views. 44 members, 283 guests and 43 web crawlers are browsing this forum.
[ Show Images Only | Sort by Score | Print Topic ]
Search this thread:

Copyright 1997-2024 Mind Media. Some rights reserved.

Generated in 0.026 seconds spending 0.011 seconds on 14 queries.