Home | Community | Message Board

Original Seeds Store
This site includes paid links. Please support our sponsors.


Welcome to the Shroomery Message Board! You are experiencing a small sample of what the site has to offer. Please login or register to post messages and view our exclusive members-only content. You'll gain access to additional forums, file attachments, board customizations, encrypted private messages, and much more!

Shop: OlympusMyco.com No Unicorns Here—Just Quality Bags That Work   Unfolding Nature Unfolding Nature: Being in the Implicate Order   Original Sensible Seeds Bulk Cannabis Seeds   Left Coast Kratom Buy Kratom Capsules   MagicBag.co All-In-One Bags That Don't Suck   PhytoExtractum Buy Bali Kratom Powder   Myyco.com Isolated Cubensis Liquid Culture For Sale   Mushroom-Hut Liquid Cultures   North Spore Bulk Substrate   Kraken Kratom Red Vein Kratom   Bridgetown Botanicals CBD Concentrates

Jump to first unread post Pages: 1 | 2 | 3  [ show all ]
Some of these posts are very old and might contain outdated information. You may wish to search for newer posts instead.
Offlinejimlo
Stranger
Registered: 01/13/14
Posts: 20
Last seen: 10 years, 11 months
need help with casing skinny shrooms ll im getiin
    #19503277 - 01/31/14 08:27 PM (10 years, 11 months ago)

So my friends set up is a big tub with a little tub inside and pearl light on the out side of the small.and sitting on aheat pad because where my friend is growing its cold he has trouble keeping the heat at 75 its usually about 70 he used the 60\40 verm coco tek used 4 cakes in the tub let in icubate tell turned white then coverd the spots andlet sitmore tell other white caught up then cold shocked it and started fruiting mushrooms are growing skiny it has a air pump tube running in and one out  for fae he fans at least threetimes a day was using little led lights but now just uses the light thats in his room andhas put a heater in the room to try and keep it at 75 temp so my queation is how to get them fatter  and does fast temp changes say from 70 to 80 back to 70 mess them up










Extras: Filter Print Post Top
OfflinePussyFart
Retired Cultivation Extrodinaire
Male


Registered: 04/08/12
Posts: 22,502
Loc: Orbiting Earth
Last seen: 7 months, 28 days
Trusted Cultivator
Re: need help with casing skinny shrooms ll im getiin [Re: jimlo]
    #19503323 - 01/31/14 08:37 PM (10 years, 11 months ago)

They need more constant fresh air.

Extras: Filter Print Post Top
OfflineAce1928
Experimenter
Male


Registered: 08/09/13
Posts: 181
Loc: NSW
Last seen: 6 years, 1 month
Re: need help with casing skinny shrooms ll im getiin [Re: jimlo]
    #19503325 - 01/31/14 08:37 PM (10 years, 11 months ago)

I can see so much green...
That substrate looks incredibly contaminated. :/


--------------------
Only by embracing that which mother nature has supplied to us can we hope to ever peacefully exist on this planet

Extras: Filter Print Post Top
InvisiblebodhisattaMDiscordReddit
Smurf real estate agent
 User Gallery

Folding@home Statistics
Registered: 04/30/13
Posts: 61,915
Loc: Milky way
Trusted Cultivator
Re: need help with casing skinny shrooms ll im getiin [Re: jimlo]
    #19503367 - 01/31/14 08:46 PM (10 years, 11 months ago)

Quote:

jimlo said:
So my friends set up is a big tub with a little tub inside and pearl light on the out side of the small.and sitting on aheat pad




:facepalm:
fail,
Heating pads have no purpose in mycology, show me where you found out that was a good idea...

Quote:

then cold shocked it



you're growing cubes right? they're tropical, Show me where it told you to cold shock cubes, they don't need that it's just slowing shit down


Quote:

air pump tube running in and one out



more fail

Quote:


for fae he fans at least threetimes a day




That's not FAE in a tub that small you would have to fan like 3-10 times an hour for FAE...

Quote:


was using little led lights but now just uses the light thats in his room




There's nothing mushrooms like about red light, they like the sun, buy a daylight bulb in the 6500K range, the small spiral ones or a tube one 26W IE 100W incandecent equivalent or better and leave it about a foot away from the top of your fruiting chamber


I'm fruiting in my place at 62F and things are fine :shrug:

Your substrate looks contaminated as hell I would throw it away ASAP then go watch the lets grow mushrooms videos and start over and forget everything you think you know about mushrooms. Sorry if all this is harsh but this is the worst I have seen this week.

I would like to see you turn things around and get good at cultivating mushrooms. Take a look at the lets grow mushroom dvd and the first link in my signature for starters.

Edited by Trusted cuItivator (01/31/14 08:47 PM)

Extras: Filter Print Post Top
OfflinePussyFart
Retired Cultivation Extrodinaire
Male


Registered: 04/08/12
Posts: 22,502
Loc: Orbiting Earth
Last seen: 7 months, 28 days
Trusted Cultivator
Re: need help with casing skinny shrooms ll im getiin [Re: bodhisatta]
    #19503368 - 01/31/14 08:47 PM (10 years, 11 months ago)

:whathesaid:

Extras: Filter Print Post Top
InvisiblebodhisattaMDiscordReddit
Smurf real estate agent
 User Gallery

Folding@home Statistics
Registered: 04/30/13
Posts: 61,915
Loc: Milky way
Trusted Cultivator
Re: need help with casing skinny shrooms ll im getiin [Re: PussyFart]
    #19503373 - 01/31/14 08:50 PM (10 years, 11 months ago)

also We're not grammar nazis but it sure does help if you can make some sentences and spell some things right just so people can understand you, we don't care if you can't talk like you went to Harvard but jesus christ.

Extras: Filter Print Post Top
InvisibleEsmash
aye Pan Cyan!!!
Male


Registered: 10/13/11
Posts: 558
Loc: the Hot Desert Flag
Re: need help with casing skinny shrooms ll im getiin [Re: bodhisatta]
    #19503390 - 01/31/14 08:55 PM (10 years, 11 months ago)

I thought a tub in tub needed an aquarium heater and
water, not a heating pad/mat.
That substrate looks so gross and moldy.
:wtfsonic:
Don't try to take prints unless you're familiar
with Agar.


--------------------

Extras: Filter Print Post Top
InvisiblebodhisattaMDiscordReddit
Smurf real estate agent
 User Gallery

Folding@home Statistics
Registered: 04/30/13
Posts: 61,915
Loc: Milky way
Trusted Cultivator
Re: need help with casing skinny shrooms ll im getiin [Re: Esmash]
    #19503395 - 01/31/14 08:57 PM (10 years, 11 months ago)

a tub in a tub isn't even a fruiting chamber it's a mushroom casket.

Extras: Filter Print Post Top
InvisibleEsmash
aye Pan Cyan!!!
Male


Registered: 10/13/11
Posts: 558
Loc: the Hot Desert Flag
Re: need help with casing skinny shrooms ll im getiin [Re: bodhisatta]
    #19503408 - 01/31/14 08:59 PM (10 years, 11 months ago)

yup it's meant for incubating.
This guy needs to do more research.
:albanomario:

EDIT: Ohh casket, I get it :lol:


--------------------

Edited by Esmash (01/31/14 08:59 PM)

Extras: Filter Print Post Top
Offlinekaptanoblivious
Moron


Registered: 11/24/13
Posts: 117
Last seen: 10 years, 10 months
Re: need help with casing skinny shrooms ll im getiin [Re: Esmash]
    #19503586 - 01/31/14 09:47 PM (10 years, 11 months ago)

:ohsnap:


--------------------
What's a signature?

Extras: Filter Print Post Top
Offlinejimlo
Stranger
Registered: 01/13/14
Posts: 20
Last seen: 10 years, 11 months
Re: need help with casing skinny shrooms ll im getiin [Re: Esmash]
    #19503619 - 01/31/14 09:55 PM (10 years, 11 months ago)

for one its not green thts just how the pic looks,for two im on my phone which is a pain to write on aready so this is the grammar you get.for two the heating pad in under the tub for heat because where they are growing is a very cold place and where he is it snows alot with out the haeting pad they would be about 55 degrees.and i have read alot on cold shocking them people putting them in fidges i read alot of people saying that on this site i have also seen that video.They cant be gown in a open room so they are in tubs .I would also like to say i have researched alot and a ton on this site almost every thing i have done i got from this site.now they might not get enough fae but  have gotten a ounce dry multple times using this exact tek the problem is i usually get alot of skinny and not a whole lot of fat .And i was using the heating mat because when it was warmer when i started it keep them at 74 degrees

Extras: Filter Print Post Top
OnlinecronicrMFacebook
 User Gallery


Registered: 08/07/11
Posts: 62,905
Loc: Van Isle Flag
Last seen: 4 minutes, 26 seconds
Trusted Cultivator
OG Cultivator
Re: need help with casing skinny shrooms ll im getiin [Re: jimlo]
    #19503629 - 01/31/14 09:57 PM (10 years, 11 months ago)

well the heating matt is making your moisture condensate which is giving you skinny fruits/dry subs


--------------------
It doesn't matter what i think of you...all that matters is clean spawn
I'm tired do me a favor

Extras: Filter Print Post Top
Offlinejimlo
Stranger
Registered: 01/13/14
Posts: 20
Last seen: 10 years, 11 months
Re: need help with casing skinny shrooms ll im getiin [Re: jimlo]
    #19503636 - 01/31/14 09:59 PM (10 years, 11 months ago)

here are some links of the info i recieved from this site here is one about cold shocking
and this is just the first one i clicked on
http://www.shroomery.org/forums/showflat.php/Number/3451639#3451639

Extras: Filter Print Post Top
OnlinecronicrMFacebook
 User Gallery


Registered: 08/07/11
Posts: 62,905
Loc: Van Isle Flag
Last seen: 4 minutes, 26 seconds
Trusted Cultivator
OG Cultivator
Re: need help with casing skinny shrooms ll im getiin [Re: jimlo]
    #19503647 - 01/31/14 10:01 PM (10 years, 11 months ago)

thats almost ten years old, yes bacteria will build up during the dunk but it's solved with a rinse after


--------------------
It doesn't matter what i think of you...all that matters is clean spawn
I'm tired do me a favor

Extras: Filter Print Post Top
Offlinejimlo
Stranger
Registered: 01/13/14
Posts: 20
Last seen: 10 years, 11 months
Re: need help with casing skinny shrooms ll im getiin [Re: jimlo]
    #19503648 - 01/31/14 10:01 PM (10 years, 11 months ago)

thank u cronic for the view on the heating mat as soon as my friend moves im just building shelfss in a closet and having racks with open tubs  and just have a heater and humidity in there.with some fans for fae wht is your guys view on tht .and i day light buld .

Extras: Filter Print Post Top
Offlinejimlo
Stranger
Registered: 01/13/14
Posts: 20
Last seen: 10 years, 11 months
Re: need help with casing skinny shrooms ll im getiin [Re: jimlo]
    #19503653 - 01/31/14 10:03 PM (10 years, 11 months ago)

u would think they would take out dated info off of here.also thats not the only place i read tht i have read a good amount on it.

Extras: Filter Print Post Top
Offlinejimlo
Stranger
Registered: 01/13/14
Posts: 20
Last seen: 10 years, 11 months
Re: need help with casing skinny shrooms ll im getiin [Re: jimlo]
    #19503668 - 01/31/14 10:05 PM (10 years, 11 months ago)

also all of tht stuff he recieved in a grow kit from midwest and even though it was for shot gun teks figuered it would work based on all the stuff on casings he had read and seen of them in tubs

Extras: Filter Print Post Top
InvisiblebodhisattaMDiscordReddit
Smurf real estate agent
 User Gallery

Folding@home Statistics
Registered: 04/30/13
Posts: 61,915
Loc: Milky way
Trusted Cultivator
Re: need help with casing skinny shrooms ll im getiin [Re: jimlo]
    #19503782 - 01/31/14 10:31 PM (10 years, 11 months ago)

Quote:

jimlo said:
u would think they would take out dated info off of here.also thats not the only place i read tht i have read a good amount on it.



they teach kids how to research in middle school since the 80s so even if your a dropout you know how to look for things less than 3 years old even if it had to be in an encyclopedia.

Quote:

jimlo said:
also all of tht stuff he recieved in a grow kit from midwest and even though it was for shot gun teks figuered it would work based on all the stuff on casings he had read and seen of them in tubs




grow kits. not being able to fruit in the middle of the room, all sounds like disaster to me.

If you want them to look good grow them as per a good reliable proven peer review tried and tested TEK says and do it to the T, lot's of kids come on here and post things they've tried some work most people only post their success not their failure so you're getting biased results, That's why you look for a proven TEK one with lot's of people behind it not just some kids posts on cold shocking which doesn't even apply to this species, cubes are tropical...

Try the BRF/PF tek or some of violets in vitro grain jars

or make in-vitro bags.

Edited by Trusted cuItivator (01/31/14 11:18 PM)

Extras: Filter Print Post Top
Offlinejimlo
Stranger
Registered: 01/13/14
Posts: 20
Last seen: 10 years, 11 months
Re: need help with casing skinny shrooms ll im getiin [Re: bodhisatta]
    #19503997 - 01/31/14 11:17 PM (10 years, 11 months ago)

I told you thats not the only post i read just the first one to pop up .in school they also taught you to understand what some one says before saying shit back. people werent  kidding about a bunch of ass holes on this site alot of u havent even giving me any good advice on how to make them better just talk shit and some of your pics my last harvest looked as good ill even post pics.i wanted good advice i obviously came to the wrong place.

Extras: Filter Print Post Top
Offlinejimlo
Stranger
Registered: 01/13/14
Posts: 20
Last seen: 10 years, 11 months
Re: need help with casing skinny shrooms ll im getiin [Re: jimlo]
    #19504010 - 01/31/14 11:19 PM (10 years, 11 months ago)

U also dont expect a site to have more wrong information then right delete the bunk shit instead of talking shit u might saveyourself and others some time.

Extras: Filter Print Post Top
InvisiblebodhisattaMDiscordReddit
Smurf real estate agent
 User Gallery

Folding@home Statistics
Registered: 04/30/13
Posts: 61,915
Loc: Milky way
Trusted Cultivator
Re: need help with casing skinny shrooms ll im getiin [Re: bodhisatta]
    #19504021 - 01/31/14 11:22 PM (10 years, 11 months ago)

Quote:

jimlo said:
I told you thats not the only post i read just the first one to pop up .in school they also taught you to understand what some one says before saying shit back. people werent  kidding about a bunch of ass holes on this site alot of u havent even giving me any good advice on how to make them better just talk shit and some of your pics my last harvest looked as good ill even post pics.i wanted good advice i obviously came to the wrong place.



I spent the time typing this out to help you, if you want to take it the wrong way go ahead but you wont be missed
:bye:

Quote:

bodhisatta said:

There's nothing mushrooms like about red light, they like the sun, buy a daylight bulb in the 6500K range, the small spiral ones or a tube one 26W IE 100W incandecent equivalent or better and leave it about a foot away from the top of your fruiting chamber


I'm fruiting in my place at 62F and things are fine

I would like to see you turn things around and get good at cultivating mushrooms. Take a look at the lets grow mushroom dvd and the first link in my signature for starters.

Try the BRF/PF tek or some of violets in vitro grain jars

or make in-vitro bags.




you can be butt hurt, or you can learn :shrug:
I myself prefer not to be a stressed out 4 year old.

Extras: Filter Print Post Top
OnlinecronicrMFacebook
 User Gallery


Registered: 08/07/11
Posts: 62,905
Loc: Van Isle Flag
Last seen: 4 minutes, 26 seconds
Trusted Cultivator
OG Cultivator
Re: need help with casing skinny shrooms ll im getiin [Re: jimlo]
    #19504025 - 01/31/14 11:22 PM (10 years, 11 months ago)

Quote:

jimlo said:
I told you thats not the only post i read just the first one to pop up .in school they also taught you to understand what some one says before saying shit back. people werent  kidding about a bunch of ass holes on this site alot of u havent even giving me any good advice on how to make them better just talk shit and some of your pics my last harvest looked as good ill even post pics.i wanted good advice i obviously came to the wrong place.



:huxleyfacepalm:
you got the advise, just because it wasn't what you wanna hear doesn't make it bad advise,so eat a fat one cause were not here to spoon feed you the bs you want to hear so :shutthefuckup:


--------------------
It doesn't matter what i think of you...all that matters is clean spawn
I'm tired do me a favor

Extras: Filter Print Post Top
InvisiblebodhisattaMDiscordReddit
Smurf real estate agent
 User Gallery

Folding@home Statistics
Registered: 04/30/13
Posts: 61,915
Loc: Milky way
Trusted Cultivator
Re: need help with casing skinny shrooms ll im getiin [Re: jimlo]
    #19504029 - 01/31/14 11:23 PM (10 years, 11 months ago)

Quote:

jimlo said:
U also dont expect a site to have more wrong information then right delete the bunk shit instead of talking shit u might saveyourself and others some time.




would you like to be the shroomery janitor? This place doesn't pay anyone, it's like the streets you got to get street smart.

Extras: Filter Print Post Top
Offlinejimlo
Stranger
Registered: 01/13/14
Posts: 20
Last seen: 10 years, 11 months
Re: need help with casing skinny shrooms ll im getiin [Re: jimlo]
    #19504045 - 01/31/14 11:27 PM (10 years, 11 months ago)

Also he is going fora large grow.he has already done other teks like shotgun and such he istryimg to get alotusing casing if some one has some good advice on how to do that or some links that would be appreciated.he also took the tops off the tubs and is using a humidifier to keep the whole room moist. And has a heater running. Should he have a fan in there a well

Extras: Filter Print Post Top
OfflinePussyFart
Retired Cultivation Extrodinaire
Male


Registered: 04/08/12
Posts: 22,502
Loc: Orbiting Earth
Last seen: 7 months, 28 days
Trusted Cultivator
Re: need help with casing skinny shrooms ll im getiin [Re: jimlo]
    #19504050 - 01/31/14 11:27 PM (10 years, 11 months ago)

EDIT: For some reason the post I was replying to just disappeared........

Edited by PussyFart (01/31/14 11:28 PM)

Extras: Filter Print Post Top
OnlinecronicrMFacebook
 User Gallery


Registered: 08/07/11
Posts: 62,905
Loc: Van Isle Flag
Last seen: 4 minutes, 26 seconds
Trusted Cultivator
OG Cultivator
Re: need help with casing skinny shrooms ll im getiin [Re: PussyFart]
    #19504052 - 01/31/14 11:28 PM (10 years, 11 months ago)

:hwbm:


--------------------
It doesn't matter what i think of you...all that matters is clean spawn
I'm tired do me a favor

Extras: Filter Print Post Top
Offlinejimlo
Stranger
Registered: 01/13/14
Posts: 20
Last seen: 10 years, 11 months
Re: need help with casing skinny shrooms ll im getiin [Re: jimlo]
    #19504063 - 01/31/14 11:30 PM (10 years, 11 months ago)

U cant expect noobs to see a bunch of old posts and know there wrong when there are alot and non saying that .and there are non saying its wrong .orthere are some just notas easily found

Extras: Filter Print Post Top
OnlinecronicrMFacebook
 User Gallery


Registered: 08/07/11
Posts: 62,905
Loc: Van Isle Flag
Last seen: 4 minutes, 26 seconds
Trusted Cultivator
OG Cultivator
Re: need help with casing skinny shrooms ll im getiin [Re: jimlo]
    #19504070 - 01/31/14 11:31 PM (10 years, 11 months ago)

Quote:

jimlo said:
U cant expect noobs to see a bunch of old posts and know there wrong when there are alot and non saying that .and there are non saying its wrong .orthere are some just notas easily found



THATS Y YOU POST! and you did and we steered you right and you spit on us, if you come across bad info there's a sticky at the top you can post it to


--------------------
It doesn't matter what i think of you...all that matters is clean spawn
I'm tired do me a favor

Extras: Filter Print Post Top
Offlinejimlo
Stranger
Registered: 01/13/14
Posts: 20
Last seen: 10 years, 11 months
Re: need help with casing skinny shrooms ll im getiin [Re: jimlo]
    #19504077 - 01/31/14 11:33 PM (10 years, 11 months ago)

What advice besides ur shit is a complete failure lol only advicei saw was about the. Heat pad or to watch avideo ive already scene

Extras: Filter Print Post Top
InvisiblebodhisattaMDiscordReddit
Smurf real estate agent
 User Gallery

Folding@home Statistics
Registered: 04/30/13
Posts: 61,915
Loc: Milky way
Trusted Cultivator
Re: need help with casing skinny shrooms ll im getiin [Re: jimlo]
    #19504080 - 01/31/14 11:34 PM (10 years, 11 months ago)

Quote:

jimlo said:
Also he is going fora large grow.he has already done other teks like shotgun and such he istryimg to get alotusing casing if some one has some good advice on how to do that or some links that would be appreciated.he also took the tops off the tubs and is using a humidifier to keep the whole room moist. And has a heater running. Should he have a fan in there a well



Answered in the Video
Watch The Video,
Watch The Video
Check out the First link in my signature,(big gro friendly at the bottom of the post, if you did a grow with a SGFC then why did you try to kill your mushrooms with that tub in a tub contraption?)
Take some of the things we said about searching and then do some critical thinking and put that info to good use

Also don't be wasting your time posting for someone else.

Quote:

jimlo said:
U cant expect noobs to see a bunch of old posts and know there wrong when there are alot and non saying that .and there are non saying its wrong .orthere are some just notas easily found



And yes I can, I have a reasonable expectation that most humans that can access this sight would be able to notice some info is not quite as good as the other info. Do you always trust the world to just provide you with the best shit the second you press send on google? Do you ever find the porn you want to watch with one search?

Edited by Trusted cuItivator (01/31/14 11:35 PM)

Extras: Filter Print Post Top
Offlinejimlo
Stranger
Registered: 01/13/14
Posts: 20
Last seen: 10 years, 11 months
Re: need help with casing skinny shrooms ll im getiin [Re: jimlo]
    #19504089 - 01/31/14 11:36 PM (10 years, 11 months ago)

i would also think the admin would be the janitor so shit like this didnt happen

Extras: Filter Print Post Top
OnlinecronicrMFacebook
 User Gallery


Registered: 08/07/11
Posts: 62,905
Loc: Van Isle Flag
Last seen: 4 minutes, 26 seconds
Trusted Cultivator
OG Cultivator
Re: need help with casing skinny shrooms ll im getiin [Re: jimlo]
    #19504092 - 01/31/14 11:36 PM (10 years, 11 months ago)

Light, Temperature, and Pinning Triggers...

Jars/bags/tubs/trays should colonize @ room temperature getting ambient/indirect light.

Main pinning triggers are full colonization, FAE and Evaporation off of the substrate.

Light is a secondary pinning trigger. For tropical species temperature is not a pinning factor.

P. Cubensis are a tropical species. You could colonize at 70F and fruit at 80F with great results.

Light has been proven beneficial during all stages of mycellium growth. Mushrooms like mammals have a circadian rhythm.

You want ambient/indirect light(on a 12/12 schedule preferably) for colonization and consolidation.

You want direct/intense 6500K light on a 12/12 schedule for fruiting.

Optimal temps are mid 70s throughout the whole grow, but anywhere from 70F-80F is acceptable.

Incubation is outdated/uneeded unless temps in the range stated above cannot be kept.

The inside of the jar is always a few degrees warmer than the outside because the mycellium produces heat..mycellium tends to stall at temps above 86F , and contams thrive.

Fruiting at cooler temps tends to produce denser, meatier fruits, while fruiting at higher temps will often produce hollow, less dense stems.

LCs From Spores...
LCs from spores are sketchy. No spore syringe/print is ever 100% clean.

This is because the cap from which the spores came was more than likely fruited in the open air.

You cannot know 100% if an LC is good or not by visual inspection.

Test jars must be shot up and grown out.

Conditions are not correct for germination of spores in sugar LCs, grain LCs or extra light malt extract based LCs are perfect for spore germination.

For best results, make LCs from a fully colonized grain jar(GLC) or from an agar wedge.

Or skip LC entirely and just G2G(Grain to Grain) transfers to expand your mycellium.

Proper SGFC

A proper SGFC should have 1/4"(6mm) holes spaced 2" apart in a grid pattern on all 6 sides(top and bottom) and filled with 5" of damp perlite.

The chamber must also be raised so that air can pass up thru the bottom holes, and wick up moisture from the water evaporating off the perlite, this will create a very humid environment inside the chamber.

A SGFC works off of the natural air currents in a room with no fans, mess with those currents and your humidity drops.

FAE

FAE = Fresh Air Exchange.

Lack of FAE leads to aerial mycellium, and mycellium crawling up the stems, or "fuzzy feet".

Bulging mycellium around the cake is sometimes an indicator that the cakes needed more time after full colonization for consolidation.

Heat and Potency

This info gets repeated daily...

The actives in muchrooms dont break down until FAR past 300F, while most dehydrators never make it past 165F.

I use my dehydrator that gets to 150F+ for 12 hours and I get completely dry fruits with no  potency loss.

Psilocybin & Psilocin Chemistry

Use Heat!

SHIT THAT GETS REPEATED DAILY

Please do not refer to spawning a bulk substrate as a casing. Coir/verm is bulk substrate material.

They used to refer to a bulk substrate as a casing, but now it just adds confusion. Its called a spawning to a bulk substrate, not casing.

A casing layer is a non nutritious top layer usually applied to a fully colonized bulk substrate for moisture retention and pinning. When you do this it is called casing, see where it can get confusing?

P.Cubensis do no benefit from a casing layer.(usually)

pinning strategies
The major pinning triggers are in order of importance, full colonization, a decrease in CO2 levels due to increased air exchange(not gas exchange which is minimal), a steady rate of evaporation from the substrate or casing layer, and lastly, light.

Hyphal knots form best in 100% humidity, but I didn't list that because it's not a pinning trigger, but rather an environmental condition that is necessary. That's why we use casing layers. The casing helps to provide the 100% humidity right at the surface of the substrate where the hyphal knots form.

I have seen no correlation with temperature drop whatsoever. In the summer, my growing chambers are 10 or more degrees warmer than the open shelves I incubate on due to the heating effects of the lights. Even with a temperature increase, I still get wall to wall pinsets, so I don't consider temp drop relevant at all to tropical species. Other growers disagree of course, but that's just my observation after many years.

Full colonization of the substrate is the number 1 pinning trigger. Full colonization can be when the mycelium reaches the physical border of the container they are in, or when they run up against a biological border, such as a contaminant species. Either way, they see they have colonized all of what is available to them, so they then enter the next phase, which is reproduction.

There must be evaporation of moisture from the substrate for pins to form. A waterlogged substrate will just sit there forever without pinning. Even in 99% humidity, as long as you provide fresh air, moisture will be evaporating away from the substrate, and this is necessary for pinning. We mist to replenish the lost moisture, then allow it to dry slightly before misting again. This keeps the moisture content high, and keeps the humidity at the casing surface near 100%, but at the same time provides the evaporation of moisture that is a very important pinning trigger.

During colonization, we provide very small holes in the jars or tubs for gas exchange. We want a high CO2 environment during colonization, because this prevents the mycelium from consuming all of the substrate. The mycelium colonizes the substrate, but doesn't 'eat it all up' due to the high CO2 levels. During fruiting, we remove the covers to provide air exchange, which is at a much higher level then the minimal gas exchange provided during colonization. This increase in air exchange lowers the CO2 levels, and is a major pinning trigger. At this time, the mycelium begins to consume the substrate it has previously colonized, and we notice during fruiting that our substrates pull away from the sides of the container. This is not due to moisture loss, but rather due to the mycelium 'eating' the substrate and turning it into CO2, a waste product. It is easily proved that this shrinking isn't related to moisture loss, because even when we dunk a bulk substrate, it doesn't return to its pre-flush size.

Last, but not by any means least is exposure to light. Light does much more than just tell the mushrooms which way to grow. There are mechanisms in the light that stimulate the formation of hyphal knots as well, and light at the higher end of the spectrum(blue) definitely, absolutely stimulate more hyphal knots(which grow into primordia, which then morph into pins) than light at the lower end of the spectrum(red) This does not mean to get a 'mood light' with a blue lens, but rather to select lights such as metal halide, or much more economical is 'natural daylight' fluorescent that emit light at around 6,000 kelvin to 7,500 kelvin depending on the brand. Cool white fluorescent emit light at around 5,000 kelvin and the 'red' incandescents emit light at around 3,000 kelvin. The higher the light temperature in kelvin, the more stimulatory it is to hyphal knot formation. I hope this helps.
RR
spores function
NOW TIME FOR...
Function
Spores either drop, or are ejected from the bottom of the mushroom cap. The miniscule size of spores allows them to get caught in, and carried along, gentle air currents. When most spores hit the ground, they fall on infertile ground: rocks, leaves of grass, streams, etc. The few spores that do fall on fertile ground send out shoots into the ground, finding other shoots, from other spores and starting a reproductive process, connecting and expanding the underground fungus system otherwise known as mycelium
hyphae is just one filament of a fungi..
mycelium is a network of hyphae..

Hyphae compose the mycelium so they have the same function, digestion and absorption of nutrients from the environment, and producing spores and sporangia. The sporangium is the structure upon which the spores are produced. The spores produce new hyphae and mycelium.

It is through the mycelium that a fungus absorbs nutrients from its environment. It does this in a two-stage process. First, the hyphae secrete enzymes onto or into the food source, which break down biological polymers into smaller units such as monomers. These monomers are then absorbed into the mycelium by facilitated diffusion and active transport.
Mycelia are vital in terrestrial and aquatic ecosystems for their role in the decomposition of plant material. They contribute to the organic fraction of soil, and their growth releases carbon dioxide back into the atmosphere. The mycelium of mycorrhizal fungi increases the efficiency of water and nutrient absorption of most plants and confers resistance to some plant pathogens. Mycelia are an important food source for many soil invertebrates.
Sclerotia are compact or hard masses of mycelia. which leads us 2....
mushrooms

The main body of the fungus - - the part that's digesting the substrate - - is called a mycelium, and the threads that make it up are called hyphae (HIGH-fee). The fruiting body of the fungus is also made up of hyphae: the "fibers" in the stem of a mushroom are made up of hyphae running in parallel to make the stem strong; the cap of the mushroom is made of of hyphae so tightly interwoven that they seem to be one solid mass;
Mushrooms are fungi, and are usually placed in a Kingdom of there own apart from plants and animals. Mushrooms contain no chlorophyll and most are considered saprophytes. That is, they obtain their nutrition from metabolizing non living organic matter. This means they break down and "eat" dead plants, like your compost pile does.
The body of the mushroom stores nutrients and other essential compounds, and when enough material is stored and the conditions are right they start to fruit - produce mushrooms. It is a hidden kingdom. The part of the fungus that we see is only the “fruit” of the organism. The living body of the fungus is a mycelium made out of a web of tiny filaments called hyphae. The mycelium is usually hidden in the soil, in wood, or another food source. A mycelium may fill a single ant, or cover many acres. The branching hyphae can add over a half mile (1 km) of total length to the mycelium each day. These webs live unseen until they develop mushrooms, puffballs, truffles, brackets, cups, “birds nests,” “corals” or other fruiting bodies. If the mycelium produces microscopic fruiting bodies, people may never notice the fungus.

Most fungi build their cell walls out of chitin. This is the same material as the hard outer shells of insects and other arthropods. Plants do not make chitin.

Fungi feed by absorbing nutrients from the organic material in which they live. Fungi do not have stomachs. They must digest their food before it can pass through the cell wall into the hyphae. Hyphae secrete acids and enzymes that break the surrounding organic material down into simple molecules they can easily absorb - this is composting.

Mushrooms are nutritious: They are a good source of B vitamins, especially niacin and riboflavin, and rank the highest among vegetables for protein content. But because they are low in fat and calories, Western nutritionists mistakenly considered them of no food value (a fresh pound has only about 125 calories). Yet in dried form, mushrooms have almost as much protein as veal and a significant amount of complex carbohydrates called polysaccharides. Shiitake mushrooms are among the most delicious & very nutritious.

Mushrooming up over night? If the body is spread out and microscopic, how do mushrooms grow so quickly? There are two basic reasons: 1) Since they store up compounds between fruiting and most fruit once a year, they have a lot of reserve available to support the mushroom. 2) Mushrooms develop differently than plants or animals do. Plants and animals grow through cell division - to get bigger they have to produce more cells. Cell division is relatively slow and requires a lot of energy. The mushroom body also grows by cell division. However, the mushroom fruit does not grow by cell division. Just about as soon as it starts to develop, a mushroom has almost the same number of cells that the mature mushroom will have. The mushroom increases in size through cell ENLARGEMENT! This means that the cells can balloon up very rapidly. Very little energy is required, basically the cells just enlarge with water. So a mushroom can increase in size as fast as water can be pumped into its cells. Almost overnight a mushroom can go from a pin head to a large mushroom.


--------------------
It doesn't matter what i think of you...all that matters is clean spawn
I'm tired do me a favor

Extras: Filter Print Post Top
InvisiblebodhisattaMDiscordReddit
Smurf real estate agent
 User Gallery

Folding@home Statistics
Registered: 04/30/13
Posts: 61,915
Loc: Milky way
Trusted Cultivator
Re: need help with casing skinny shrooms ll im getiin [Re: jimlo]
    #19504093 - 01/31/14 11:36 PM (10 years, 11 months ago)

Quote:

jimlo said:
What advice besides ur shit is a complete failure lol only advicei saw was about the. Heat pad or to watch avideo ive already scene



Fine, Here you go.

Extras: Filter Print Post Top
InvisiblebodhisattaMDiscordReddit
Smurf real estate agent
 User Gallery

Folding@home Statistics
Registered: 04/30/13
Posts: 61,915
Loc: Milky way
Trusted Cultivator
Re: need help with casing skinny shrooms ll im getiin [Re: bodhisatta]
    #19504097 - 01/31/14 11:37 PM (10 years, 11 months ago)

and here you go again

The Up To Date Shroomery use and Mushroom Cultivation Guide V1.0
This is meant to serve as a way to get any one accustomed to using the Shroomery as a research and diagnostic tool in a effective way as to benefit both the community and the self. In addition serve as a useful resource to get any person started with cultivation by providing the most up to date, user friendly, crowed sourced, time tested, and repeatedly proven TEKs possible.

First things First, read the forum rules

Your best tool: The Search Engine
If you use the advance search engine you can click a box for trusted cultivators. This will give you replies to the question you had(that's already been asked 100s of times) by people that know their shit. Please do this before posting any question you have
Also, You can limit the age of the posts to something like 2 years to make sure you get relevant information.

Quote:

bodhisatta said:
the thing with the shroomery is you can find anything you want to confirm your beliefs. There's 1000s of posts from all sorts of members a huge percentage of which know relatively little about mycology, even myself I consider to be amateur at best in mycology. You'll only see people post their success and rarely if ever their failures. So you're only seeing the people that got away, Hey I made this and this doing this and this and it for whatever reason worked the one time they did it and now they come here and say try this to a bunch of people. If you want to do yourself a favor look for TEKs that have a lot of views and replies less than two to three years old and see if people have success replicating them, find a grow along with a TEK and see how many people got results, not some kid saying h2o2 kills bacteria in a LC, I could go post that right now and half the people would believe it.




Quote:

bodhisatta said:
If you want them(cubes) to look good grow them as per a good reliable proven peer review tried and tested TEK says and do it to the T, lot's of kids come on here and post things they've tried some work most people only post their success not their failure so you're getting biased results, That's why you look for a proven TEK one with lot's of people behind it not just some kids bunk posts on cold shocking which doesn't even apply to this species, cubes are tropical...






Uh,oh you bought a grow kit :sad:
Take a look here and see if there's any way to salvage it.
Chances are you just gave your money to someone who shipped you a box full of reminders that you just got kicked in the nuts.
Don't fret though for less money then you spent on the kit you can get going the right way.

Got spores?
Check out the sponsors list Here
Here's the part of the forums to ask about which vendor to go with etc... Remember *Read the rules first*
Sponsor fourms

What to do with spores.
*PROtip : don't say I used sponsor XYZ's spores to do cultivation(in the rules)*
Start here.

Alright, now you're informed from watching Let's grow mushrooms. The best few bucks you'll ever spend if you want to download it. Don't be cheap its 9$. (This is the only time I'm going to tell you to buy something that's not supplies for growing. Actually the videos are supplies if you think about it)

You can decide to do the PF tek or go to grains. If you want to go to grains you're going to need a pressure cooker, no question yes you do, unless you want to steam them at atmospheric pressure for 8 hours.

PF tek.

Quote:

bodhisatta said:
When you don't have your own experience you should find something your gut tells you is trustworthy through your own investigation. Use the people who developed it's experience and let that guide you without throwing in your own gut feelings because they've likely had the same ones and figured out already that that didn't work. Then you'll develop your own experience and be able to branch out and continue the evolution of your craft.





When starting out it's best to follow the tek directions to the T. This will help us with any diagnosis if you run into a problem and need to ask for help on here in your own thread.

Obviously mushrooms are not as dangerous to fail as a failure in say flying an airplane but you're making food that you eat here so please follow directions until you have your own experience to rely on.

OK, lets get started.

Get some jars.
You can use anything that's about 1/2 pint and is as wide as it is tall. There's 3 different Ball/Kerr jars that are 1/2 pint size. The wide-mouth is the ones you want to get. Regular mouth is tall and skinny and can lead to the mycellium stalling out. I have had success using these jars, so if you have them try them, but buy the right kind. If you can find a recycling code 5 AKA PP plastic tupperware you can rig that into a PF jar too albeit with a modified lid procedure *search engine bonus round*.

Evilmushroom666's take on PF cakes.
Here's a thread I endorse if you want some very good supplemental instruction.

Vermiculite
*PROtip : this stuff is not perlite*
Found at most garden stores and some hardware stores, this mineral is a backbone of the PF mix supplying water and giving a texture that is easy for the mycelium to grow through

Water
Anything but distilled. Distilled is great for making spore syringes only and filling up humidifiers only.

BRF
you can grind your own brown rice or find it at a organic food store most likely. Brown rice still has the bran layer which is what we want.

Sterilization
PF tek can be done without a pressure cooker(PC) in a steam bath for 90 minutes. Make sure the lid fits nicely, and the jars are protected from the bottom of the pan.
*sterilization is not sanitation look them up if you are unfamiliar*
A pressure cooker can be set for 60m at 15PSI when doing PF tek.

Inoculation
Don't speed up the cooling down process,
Take the foil off of the jars after they cool
Don't leave it on *please*
Flame sterilize the needle and don't wipe it with alcohol
Alcohol sanitizes flame sterilizes. You don't want the 0.01% of nasty shit on the needle 
Use 0.25CC(aka mL) per hole or less
Make sure to get the needle against the glass and below the verm barrier.

**You'll want to at the vary least use a SAB(still air box=search engine practice time) to ensure clean inoculations)**

Patience
First sign of growth can take up to two weeks!
Use this time to look around the forums and look at typical pictures of PF jars and what mycellium looks like. Try to take advantage of learning from the language used in posts that get the most help around here.

Dunk and Roll
Don't skip this.
Quote:

cswizzle said:
Yes! I rolled them then misted right away so a lot fell off. But lesson learned and the pins seem to be growing great now. Successful first cakes so far :smile:



Let the verm stick to your cakes for a few hours before the initial misting or this will happen. Not the end of the world but I'd like to see you avoid it.

Fruiting Chamber
A SGFC has 1/4" holes spaces 2 inches apart in a grid patten on all six sides. 4-6 inches of moist perlite. No attachments made to it with any extra things like humidifiers. Optimally the SGFC should be in the middle of a room. No fans should be run in the room with the SGFC, but a cracked window is OK. A humidifier in your house can help to raise the ambient RH but don't put it near your SGFC put it in the other corner of the room if you do decide to run a humidifier at all. The SGFC IMO should have at least 6-12 inches of room from any wall on all 6 sides. This includes finding some sort of raisers to elevate the SGFC off of the surface it's on.

Misting and Fanning.
This is a source of much grief and 100's of posts a week here. Misting and fanning is not at all complicated as it needs to be. In general you'll mist your cakes until they glisten(yes they can even with the verm on them) and then fan right after the mist. You can mist your cakes directly and you should. When you notice the cake is no longer glistening you can mist it again and then fan. This occurs on average of 3-5 times a day. Don't worry about sleeping or being gone 12 hours. Just do it when you're around and don't forget about it is all. Fanning is not FAE it's only purpose is to relive the high RH air so that the cakes can get a kickstart on evaporation.

FAE
This is a phenomenon (Fresh air exchange) in a properly built SGFC this is constantly happening. The perlite is naturally cooler than the surrounding air this moves molecules closer to eachother as the lose kinetic energy. This creates low pressure which pulls air up through the bottom holes. As the air moves through the perlite it picks up humidity and keeps the chamber at or above 90%RH. This occurs naturally without the fanning and is why we like to have no fans in the room and is also why fanning after misting is not a replacement for FAE.

Quote:

Notahacker420 said:
Fanning is not a replacement for constant FAE.

You would need to fan several times per hour.



:whathesaid:

Quote:

The physics of the shotgun terrarium are that evaporation causes a temperature drop, thus the air molecules are closer together.  This results in higher pressure within the air spaces around the perlite.

The substrates and/or lights provide slight heating within the body of the terrarium.  This results in relatively lower pressure.  This low pressure area above the perlite(high pressure) results in airflow to balance the pressure.  This in turn leads to more evaporation from the perlite, continuing the process.  This is why a shotgun terrarium handles FAE automatically.

The CO2 does not settle to the bottom.  In addition, the CO2 from mushrooms is mixed thoroughly into the O2, thus it travels out through the holes in the sides and top as part of the natural circulation.  It doesn't enter the denser air within the perlite and spill out the bottom.
RR



Quote:

RogerRabbit said:
Quote:

JayBrasco said:
fewer, you dont want alot of humidity to escape. only enough on the BOTTOM to get rid of CO2




Bad advice.  Fresh air exchange causes a loss of moisture from the cakes or other substrate, and this loss of moisture is the number ONE pinning trigger.  Noobs worry too much about humidity, which is easily corrected with misting.  You MUST mist to make up for the lost moisture.  In the old days, people would toss cakes in a sealed up chamber and hope for a couple of mushrooms before green mold set in.  Today, you can easily get three or four times the harvest the early growers did by using a proper terrarium that provides both fresh air and high humidity.

Furthermore, why you guys think CO2 is heavy like water and will drain out holes in the bottom baffles the mind.  If all the CO2 settled to the bottom, we'd all be dead due to the power plants and cars, cows, etc., that are puking out tons of CO2 by the minute.  The CO2 MIXES with the air and thus must be exchanged WITH the air.  It isn't a sweet little layer on the bottom of your fruiting chambers.

As for only reading 80% humidity in a shotgun terrarium with a humidifier running in the closet, it proves your hygrometer is screwed.  I can put a shotgun terrarium in an open room with the lid totally off and get higher humidity than that.

I seriously doubt anyone has lower humidity than I do.  It's below zero outside and I use a large cast iron wood stove to heat my cabin.  My properly made shotgun terrariums all read 95% or greater.  I keep a cool mist humidifier running near the wood stove, and it's nice and cozy in here, even though there's nearly five feet of snow on the ground outside.
RR



Co2's concentration in "air" is higher at sea level but it's still mixed evenly with the air. Yes gravity does work but it doesn't pull co2 out of the air to make it it's own distinct layer.

even more on the subject

RH
You can't see RH, a SGFC should have no condensation on the walls, Condensation is caused by temperature differentials, if you have condensation you need to fix something. If you want to measure RH the bare minimum in quality for a hygrometer is a analog cigar box one that can be calibrated or a "synthetic hair hygrometer"

Pinning triggers debunked
No1 triggers are. full colonization of the substrate and then slow evaporation of moisture off of the substrate. This happens with the interplay between high RH and FAE.

no2(secondary) trigger are everything else like light

Common Misconceptions that new growers always do
Plugging up the holes on your SGFC will LOWER the humidity and give you LESS FAE which means more stale air more bacterial buildup and uglier shrooms.

You can dunk your cakes with pins on them

FAE is not a specific number of FAEs per hour. FAE is keeping your CO2 levels below ~600-1000PPM. Obviously in a huge room with only one small cake you would not need even 1 FAE an hour, In a two liter soda bottle with one cake you would need several FAE per hour to keep your CO2 levels in check.

Lighting requirements of mushrooms

Quote:

PocketRevolution said:
There are two great terrarium designs that the majority of users on this site use.  Monotubs and Shotgun terrariums.  Both these designs have the advantages of having no moving parts, having no need for electricity (+water=danger), and working really well.

I spent a few hundred dollars building a Poor Man's Pod to spec. (PMP is a design similar to what you're describing but using LECA as an evaporative medium).  It did work.  It was also really heavy, and sometimes the water turned a bit skunky, and the bubble wands clogged with red sand.  Eventually it sprung a leak and leaked all over my floor.  Luckily I had kept my power bar off the ground.  Since my tub already had one hole in it I figured drilling more was the way to go, and I converted it into a shotgun terrarium , and I never looked back.






-After the PF tek-

Start here

How frank gets shit done
This is franks post with links to his teks.
Frank is one of our Trusted Cultivators.


Tips and tricksLot's of good stuff in here.

Preparing grain spawn
What to do with that spawn? Coir prep Tek

Know you want to do monotubs right away?

Monotubs/Grain spawn
How to get started

1. Make grain spawn WBS is used in the TEK(I use rye)
Frank's WBS Prep (perfect every time)

2. If you want to expand your grain jars without individual inoculation use G2G transfers
Grain to grain in a SAB

3. Now you should have colonized grain spawn, time to make a bulk substrate to spawn to.
Frank's Simple Coir/Verm Tek
I personally use coir
Frank's hpoo substrate, revisited
poo works too

4. That substrate has to be pasteurized, here's some info to clear up any confusion about pasteurization
Frank's Proper Pasteurization Tek 3.0

5. Ok you have spawn and bulk substrate, time to mix them
Frank's Bulk Spawning Tek (in a monotub)

6. Additional monotub info for best results
How to dial in your monotubs like a boss

Extras: Filter Print Post Top
OfflinePussyFart
Retired Cultivation Extrodinaire
Male


Registered: 04/08/12
Posts: 22,502
Loc: Orbiting Earth
Last seen: 7 months, 28 days
Trusted Cultivator
Re: need help with casing skinny shrooms ll im getiin [Re: bodhisatta]
    #19504152 - 01/31/14 11:51 PM (10 years, 11 months ago)

:lol:

Extras: Filter Print Post Top
OnlinecronicrMFacebook
 User Gallery


Registered: 08/07/11
Posts: 62,905
Loc: Van Isle Flag
Last seen: 4 minutes, 26 seconds
Trusted Cultivator
OG Cultivator
Re: need help with casing skinny shrooms ll im getiin [Re: PussyFart]
    #19504161 - 01/31/14 11:53 PM (10 years, 11 months ago)

Quote:

PussyFart said:
:lol:



ask you shall recieve:laugh2:


--------------------
It doesn't matter what i think of you...all that matters is clean spawn
I'm tired do me a favor

Extras: Filter Print Post Top
InvisiblebodhisattaMDiscordReddit
Smurf real estate agent
 User Gallery

Folding@home Statistics
Registered: 04/30/13
Posts: 61,915
Loc: Milky way
Trusted Cultivator
Re: need help with casing skinny shrooms ll im getiin [Re: cronicr]
    #19504169 - 01/31/14 11:54 PM (10 years, 11 months ago)

Quote:

cronicr said:
Quote:

PussyFart said:
:lol:



ask you shall recieve:laugh2:



:whathesaid:
Really wanted the spoon feeding.

Extras: Filter Print Post Top
Offlinejimlo
Stranger
Registered: 01/13/14
Posts: 20
Last seen: 10 years, 11 months
Re: need help with casing skinny shrooms ll im getiin [Re: jimlo]
    #19504178 - 01/31/14 11:56 PM (10 years, 11 months ago)


Extras: Filter Print Post Top
Offlinejimlo
Stranger
Registered: 01/13/14
Posts: 20
Last seen: 10 years, 11 months
Re: need help with casing skinny shrooms ll im getiin [Re: jimlo]
    #19504182 - 01/31/14 11:57 PM (10 years, 11 months ago)

thnk u guys for all the adviice thts wht he needed but if a couple of u disagree im kinda in the same spot on which to believe but thank u im saving all this info for my friend

Extras: Filter Print Post Top
Offlinejimlo
Stranger
Registered: 01/13/14
Posts: 20
Last seen: 10 years, 11 months
Re: need help with casing skinny shrooms ll im getiin [Re: jimlo]
    #19504192 - 01/31/14 11:59 PM (10 years, 11 months ago)

thanks for the spoon feeding lol

Extras: Filter Print Post Top
OnlinecronicrMFacebook
 User Gallery


Registered: 08/07/11
Posts: 62,905
Loc: Van Isle Flag
Last seen: 4 minutes, 26 seconds
Trusted Cultivator
OG Cultivator
Re: need help with casing skinny shrooms ll im getiin [Re: jimlo]
    #19504201 - 02/01/14 12:02 AM (10 years, 11 months ago)

post again and your gonna get your ass wiped:laugh2:


--------------------
It doesn't matter what i think of you...all that matters is clean spawn
I'm tired do me a favor

Extras: Filter Print Post Top
Offlinejimlo
Stranger
Registered: 01/13/14
Posts: 20
Last seen: 10 years, 11 months
Re: need help with casing skinny shrooms ll im getiin [Re: cronicr]
    #19504307 - 02/01/14 12:40 AM (10 years, 11 months ago)

ill wipe my dick on ur face

Extras: Filter Print Post Top
OfflinePussyFart
Retired Cultivation Extrodinaire
Male


Registered: 04/08/12
Posts: 22,502
Loc: Orbiting Earth
Last seen: 7 months, 28 days
Trusted Cultivator
Re: need help with casing skinny shrooms ll im getiin [Re: jimlo]
    #19504310 - 02/01/14 12:42 AM (10 years, 11 months ago)

Promise?

Extras: Filter Print Post Top
OnlinecronicrMFacebook
 User Gallery


Registered: 08/07/11
Posts: 62,905
Loc: Van Isle Flag
Last seen: 4 minutes, 26 seconds
Trusted Cultivator
OG Cultivator
Re: need help with casing skinny shrooms ll im getiin [Re: PussyFart]
    #19504331 - 02/01/14 12:49 AM (10 years, 11 months ago)

:waitingpatiently:


--------------------
It doesn't matter what i think of you...all that matters is clean spawn
I'm tired do me a favor

Extras: Filter Print Post Top
Offlinejimlo
Stranger
Registered: 01/13/14
Posts: 20
Last seen: 10 years, 11 months
Re: need help with casing skinny shrooms ll im getiin [Re: cronicr]
    #19504344 - 02/01/14 12:56 AM (10 years, 11 months ago)

Mmmmm i love me some hairy blue guy

Extras: Filter Print Post Top
Offlinejimlo
Stranger
Registered: 01/13/14
Posts: 20
Last seen: 10 years, 11 months
Re: need help with casing skinny shrooms ll im getiin [Re: jimlo]
    #19504347 - 02/01/14 12:58 AM (10 years, 11 months ago)

I looked at alot of ur links and your def growin some monsters so im gunna try some of those out ill post back when i get good results

Extras: Filter Print Post Top
OnlinecronicrMFacebook
 User Gallery


Registered: 08/07/11
Posts: 62,905
Loc: Van Isle Flag
Last seen: 4 minutes, 26 seconds
Trusted Cultivator
OG Cultivator
Re: need help with casing skinny shrooms ll im getiin [Re: jimlo]
    #19504352 - 02/01/14 12:59 AM (10 years, 11 months ago)

:sheepfucker:
:laugh2:, good luck and keep me posted:cool:


--------------------
It doesn't matter what i think of you...all that matters is clean spawn
I'm tired do me a favor

Extras: Filter Print Post Top
Jump to top Pages: 1 | 2 | 3  [ show all ]

Shop: OlympusMyco.com No Unicorns Here—Just Quality Bags That Work   Unfolding Nature Unfolding Nature: Being in the Implicate Order   Original Sensible Seeds Bulk Cannabis Seeds   Left Coast Kratom Buy Kratom Capsules   MagicBag.co All-In-One Bags That Don't Suck   PhytoExtractum Buy Bali Kratom Powder   Myyco.com Isolated Cubensis Liquid Culture For Sale   Mushroom-Hut Liquid Cultures   North Spore Bulk Substrate   Kraken Kratom Red Vein Kratom   Bridgetown Botanicals CBD Concentrates


Similar ThreadsPosterViewsRepliesLast post
* skinny shrooms Zmann 1,021 1 10/17/01 11:10 AM
by BeppoMarx
* casing - picking shrooms longbong 1,570 1 06/17/01 08:01 AM
by Anonymous
* Re: Lizard King --Need you opinion on casing please Lizard King 2,306 4 07/11/00 11:43 AM
by Anonymous
* Skinny PR'S Whats up? Azurepower 571 2 02/06/02 10:01 PM
by bassplayer74
* CASING FOR NEWBIE XAZIA 1,532 7 09/15/01 03:39 AM
by Anno
* When to birth, when to case? Grdnby 835 3 05/19/01 12:22 AM
by Taz
* quick casing question Zadig 631 1 01/31/02 11:55 PM
by Under_net
* Re: Problem with growth of mycelium in casing MuffinBear 2,474 8 06/26/00 04:03 PM
by PhilosoPossum

Extra information
You cannot start new topics / You cannot reply to topics
HTML is disabled / BBCode is enabled
Moderator: Shroomism, george castanza, RogerRabbit, veggie, mushboy, fahtster, LogicaL Chaos, 13shrooms, hamloaf, cronicr, Stipe-n Cap, Pastywhyte, bodhisatta, Tormato, Land Trout, A.k.a
3,137 topic views. 34 members, 115 guests and 31 web crawlers are browsing this forum.
[ Show Images Only | Sort by Score | Print Topic ]
Search this thread:

Copyright 1997-2025 Mind Media. Some rights reserved.

Generated in 0.047 seconds spending 0.009 seconds on 12 queries.