|
Some of these posts are very old and might contain outdated information. You may wish to search for newer posts instead.
|
ucwarrior1
Stranger
Registered: 01/04/14
Posts: 6
Last seen: 10 years, 13 days
|
q21's dry tek-dmt extraction question
#19366903 - 01/04/14 05:03 AM (10 years, 27 days ago) |
|
|
This extraction was exactly with failed results. followed everything was supposed to for the first pull. This was done immediately after reaching consistantcy. The final product is a yellow liquid that still hasn't evaporated in 3 days and even when evaped using heat the smoke taste like shit. As if vinegar was still mixed in although ringing of the ears tells me its the xylene poisoning me. As you looked back at the tek realiz there is an discrpency in the tek about wait times. During the non polar wash, it states that extractions can be taken 3 weeks after a pull...meaning once the xylene is used more can be added for another extraction? So the second extraction can still be done 3 days later after the xylene was already mixed with the consistantcy mash?
Thanks
Edited by ucwarrior1 (01/11/14 08:20 PM)
|
Kief Ledger
Stranger

Registered: 11/10/11
Posts: 1,784
Last seen: 7 months, 18 days
|
Re: q21's dry tek-dmt extraction question [Re: ucwarrior1]
#19367560 - 01/04/14 10:36 AM (10 years, 27 days ago) |
|
|
Never done the 1st tek, but I would say you should have waited at least a day after adding the lime before you do your first pull. With lime I'm pretty sure it takes longer for it to basify the bark.(don't quote me on that).
Also did you salt with vinegar, or evaporate? If you salted, maybe you got some solvent in with the vinegar.
Also, and I know this doesn't help with your current extraction. The tek 2 fluffy white funfest works wonders and is stupid easy.
|
ucwarrior1
Stranger
Registered: 01/04/14
Posts: 6
Last seen: 10 years, 13 days
|
Re: q21's dry tek-dmt extraction question [Re: Kief Ledger]
#19369895 - 01/04/14 07:19 PM (10 years, 26 days ago) |
|
|
The salting was done per instruction with 1 shot glass of vinegar and water. As I heat and dried this mix it gets darker orange. The smell is just like the smoke, terrible.
So that means in the ten it should state after adding lime to wait, I don't believe it classifies when to wait after reaching consitentcy.
I'll check that tek out but I moved on to lazymans now with some new material
|
Kief Ledger
Stranger

Registered: 11/10/11
Posts: 1,784
Last seen: 7 months, 18 days
|
Re: q21's dry tek-dmt extraction question [Re: ucwarrior1]
#19370706 - 01/04/14 11:08 PM (10 years, 26 days ago) |
|
|
No but it does tell you the rough yields you'll get if you wait. Also that sounds about right..your extracting jungle spice with xylene. It should be a deep orange to red. I can comment on the smoke as i haven't tried it, but it should have that distinct dmt plasticy smell. Or kind of line a new pair of sneakers. The vinegar isnt going to evaporate very easily I'd imagine, and its probally going to have a leftover taste.
Also did you filter with a cotten ball? You could have gotten some sediment in with your alkaloids.
Don't give up yet.. there's dmt in that there bark!
|
ucwarrior1
Stranger
Registered: 01/04/14
Posts: 6
Last seen: 10 years, 13 days
|
Re: q21's dry tek-dmt extraction question [Re: Kief Ledger]
#19371172 - 01/05/14 01:59 AM (10 years, 26 days ago) |
|
|
Well I appreciate the answers...but I'm losing hope. Like I said when in tried smoking the spice I got ringing of the ears, the ceiling Spackle flows (normal DMT feel) but nothing else changes. So now I have bark that has xylene sitting in it for the past 3 days and don't know what to do with it.
I also have bad news...I performed two more extractions...one with a friend the way he has done it a few times. This yielded a small amount of DMT smelling product but waaaaay to small of a yield. I personally was sick of this by now and performed the lazymans tek. Following. All steps through the 3rd extraction I received nothing but clear naphtha, which evaporated leaving nothing!
What's going on?
**I should mention that I noticed in thee friends tek it had 3 layers. Black, grey, and solvent.
|
rikuni

Registered: 04/06/10
Posts: 982
Last seen: 9 years, 10 months
|
Re: q21's dry tek-dmt extraction question [Re: ucwarrior1]
#19371518 - 01/05/14 06:28 AM (10 years, 26 days ago) |
|
|
sounds bad. would not smoke that ever!
|
ucwarrior1
Stranger
Registered: 01/04/14
Posts: 6
Last seen: 10 years, 13 days
|
Re: q21's dry tek-dmt extraction question [Re: rikuni]
#19375815 - 01/06/14 04:41 AM (10 years, 25 days ago) |
|
|
Had to try it once cause it smelled similar. Didn't see a difference from accidental smoking xylene to breathing it in from work all the time. Anyway...suggestions? What can be going wrong
|
Kief Ledger
Stranger

Registered: 11/10/11
Posts: 1,784
Last seen: 7 months, 18 days
|
Re: q21's dry tek-dmt extraction question [Re: ucwarrior1]
#19381298 - 01/07/14 08:21 AM (10 years, 24 days ago) |
|
|
How long are you leaving the solvent in with your bark to do your pulls, because 3 days is way too long.. should take 20 mins.
Are you heating your pulls in a bath.
Go back and re read the tek and make sure you followed exactly.
|
ucwarrior1
Stranger
Registered: 01/04/14
Posts: 6
Last seen: 10 years, 13 days
|
Re: q21's dry tek-dmt extraction question [Re: Kief Ledger]
#19383218 - 01/07/14 03:41 PM (10 years, 23 days ago) |
|
|
The xylene bark was tossed. I followed the tek exactly and yielded nothing. I waited 1 hour which was stated as a minimum time after mixing in lime. It soundss like you can choose how long after an hour after lime with better results in time. The second lazy mans tek says to add solvent and wait 24 hours beginning at the 5th pull. I finally got a yield from the lastbtwobattempts but it was a terribly small amount.
I'm new at all this and assumed following a tek and measuring dont be that bad. Apparently so.
|
ImFukNCLUELESS
I SPIT ON PEOPLE


Registered: 11/19/12
Posts: 1,580
Last seen: 9 years, 19 days
|
Re: q21's dry tek-dmt extraction question [Re: ucwarrior1]
#19385702 - 01/07/14 10:58 PM (10 years, 23 days ago) |
|
|
Edit
Sorry i been trying quiklights
--------------------
how to pass a drug test FOO MAN'S WBS TEK damions5050's coir tek DONATE TO THE "IM FUCKING BROKE FUND" 1PtqhURaxtCpGpeUBNqeZi7XnmKwWe8WWf "my girl said it's OK to have a little penis I prefer she didnt have a penis at all"-prisoner#1
Edited by ImFukNCLUELESS (01/07/14 10:59 PM)
|
ucwarrior1
Stranger
Registered: 01/04/14
Posts: 6
Last seen: 10 years, 13 days
|
Re: q21's dry tek-dmt extraction question [Re: ImFukNCLUELESS]
#19386261 - 01/08/14 01:33 AM (10 years, 23 days ago) |
|
|
I having measured what I've been getting but it looks like equal parts of white and yellow' about .75g? I'm finalizing a 5th extraction now of both of the runs added together. I think it may have just been a heat issue. Due to the weather the room might have been between 60-65 degrees.
Seems the solution is just heat.
|
Kief Ledger
Stranger

Registered: 11/10/11
Posts: 1,784
Last seen: 7 months, 18 days
|
Re: q21's dry tek-dmt extraction question [Re: ucwarrior1]
#19390997 - 01/08/14 10:28 PM (10 years, 22 days ago) |
|
|
Yea you need to heat you mixture. Use a warm bath. You can also warm your solvent in the same manner before adding to the bark to increase solubility.
|
|