Home | Community | Message Board


This site includes paid links. Please support our sponsors.


Welcome to the Shroomery Message Board! You are experiencing a small sample of what the site has to offer. Please login or register to post messages and view our exclusive members-only content. You'll gain access to additional forums, file attachments, board customizations, encrypted private messages, and much more!

Shop: PhytoExtractum Kratom Powder for Sale, Maeng Da Thai Kratom Leaf Powder   Kraken Kratom Red Vein Kratom   Bridgetown Botanicals CBD Concentrates

Jump to first unread post Pages: 1 | 2 | 3 | 4  [ show all ]
Invisiblefee
Im he who is the
 User Gallery

Registered: 01/16/03
Posts: 18,238
Loc: amsterdam
School me on how to drill a holes in a glass bottle
    #19046565 - 10/28/13 03:20 PM (10 years, 3 months ago)

So I need to drill either a bunch of tiny 1/8" holes or if the task doesn't get more difficult when making bigger holes then a few 3/8" would be nice.

So I believe the best incense burner is a glass beverage bottle.
Just attach a key ring to the stick of incense and drop it cherry down in the bottle.

You need a large mouth bottle or drill hole in the glass so oxygen can enter.

These holes don't need to be pretty just functional.

Can I do this with a screw gun?


The only thing I know it you put a few layers of tape where your going to drill. I'm assuming that's to hold you straight and possibly it it chips it contains it :shrug:


Anyway any positive feed back is very appreciated and comedic foolery is encouraged as long as your funny. Bad attempts at fucking off is not tolerated. You know who you are I dont know who you are but I'm sure you do


--------------------

blankk said to fee:
btw you're a total fucking psychedelic pimp
Turtletotem said:
I want to become a sun worshipper, so next time an atheist smugly asks me where god is, I can point smugly at the sun and laugh my ass off.

Then I drive away in my solar powered piece of shit car, cool stuff man.

And then I go kill a bitch because the flaming orb in the sky told me to do so, and I don't know, oppress a few minorities here and there in the name of nuclear fusion?

Religion is fun.


Extras: Filter Print Post Top
Invisiblexanderofpella

Registered: 12/22/11
Posts: 3,949
Re: School me on how to drill a holes in a glass bottle [Re: fee]
    #19046594 - 10/28/13 03:24 PM (10 years, 3 months ago)

i believe you'll need a special drill bit.


--------------------
[quote]sVs said:
Adorable overload is imminent.[/quote]

[quote]YSHServant  said:
You are on my turf when you are in the pub.[/quote]

[quote]ButteredToast said:
Shroomery 2012- Thread goes from discussing a possibly deceased member to posting nudes of her.[/quote]


Extras: Filter Print Post Top
OfflineKing Klick
That Guy Everyone Knows
Male User Gallery


Registered: 11/13/11
Posts: 7,267
Last seen: 6 months, 30 days
Re: School me on how to drill a holes in a glass bottle [Re: xanderofpella]
    #19046604 - 10/28/13 03:25 PM (10 years, 3 months ago)

You need a glass drill bit that you can get at most hardware stores. Look at soundrones how to drill glass. He does it for bongs.


--------------------
Your god is dead, and I killed him.

When you’re lost, here I am. Forever with your soul



Extras: Filter Print Post Top
Invisiblefee
Im he who is the
 User Gallery

Registered: 01/16/03
Posts: 18,238
Loc: amsterdam
Re: School me on how to drill a holes in a glass bottle [Re: King Klick]
    #19046622 - 10/28/13 03:29 PM (10 years, 3 months ago)

Yeah I do believe so.

I know you can drill and even cut glass bottles with a dremal and the right bits so I don't see when simple can't be done with a screw gun and the right bit and technique. Hence why this thread was created.









Quote:

King Klick said:
You need a glass drill bit that you can get at most hardware stores. Look at soundrones how to drill glass. He does it for bongs.



Awesome thank you.


--------------------

blankk said to fee:
btw you're a total fucking psychedelic pimp
Turtletotem said:
I want to become a sun worshipper, so next time an atheist smugly asks me where god is, I can point smugly at the sun and laugh my ass off.

Then I drive away in my solar powered piece of shit car, cool stuff man.

And then I go kill a bitch because the flaming orb in the sky told me to do so, and I don't know, oppress a few minorities here and there in the name of nuclear fusion?

Religion is fun.


Extras: Filter Print Post Top
Invisiblerackem
Male User Gallery


Registered: 11/27/09
Posts: 14,024
Re: School me on how to drill a holes in a glass bottle [Re: fee]
    #19046629 - 10/28/13 03:29 PM (10 years, 3 months ago)

i dont think a screw gun will work.

i believe you will need a proper drill because of the speed.


--------------------


Extras: Filter Print Post Top
Offlinedontknow
It's all in the reflex


Registered: 07/05/13
Posts: 3,889
Last seen: 7 years, 3 months
Re: School me on how to drill a holes in a glass bottle [Re: King Klick]
    #19046630 - 10/28/13 03:30 PM (10 years, 3 months ago)

You can tie acetone soaked string around a glass bottle, set the string on fire, then dunk it in cold water and get a clean cut.

Maybe you can do something similar like superglue fabric in a circle onto the bottle, soak in acetone, light, douse in cold water.

Although a special drill bit would be better and easier


--------------------
:box:

The discerning heart seeks knowledge, but the mouth of a fool feeds on folly. -Proverbs 15:14

:tripping2: :shroomer:  :trippinballs: :shroomin:

“Imagination is everything. It is the preview of Life’s coming attractions.”
Albert Einstein


Extras: Filter Print Post Top
Offlinempd
Lammen Gorthaur
Male User Gallery


Registered: 10/22/12
Posts: 9,660
Loc: Mostly at home... Mostly....
Last seen: 8 years, 7 months
Re: School me on how to drill a holes in a glass bottle [Re: fee]
    #19046634 - 10/28/13 03:30 PM (10 years, 3 months ago)

You can go down to the local headshop and get a bong for a few dollars.  Surely that will not break the bank.


--------------------
There is no truer calling for mankind than that of true conservatism.


Extras: Filter Print Post Top
Offlinenicechrisman
Interdimensional space wizard
Male User Gallery


Registered: 11/07/03
Posts: 33,241
Last seen: 4 years, 6 months
Re: School me on how to drill a holes in a glass bottle [Re: fee]
    #19046637 - 10/28/13 03:30 PM (10 years, 3 months ago)

Quote:

fee said:

.




--------------------
"Cosmic Love is absolutelely ruthless and highly indifferent:
it teaches its lessons whether you like/dislike them or not."

John C. Lily

 


Extras: Filter Print Post Top
InvisibleShroomismM
Space Travellin
Male User Gallery

Folding@home Statistics
Registered: 02/13/00
Posts: 66,015
Loc: 9th Dimension Flag
Re: School me on how to drill a holes in a glass bottle [Re: mpd]
    #19046668 - 10/28/13 03:34 PM (10 years, 3 months ago)

Where do you live that you can get a 'bong' from a headshop for a 'few dollars'? Bongs cost many dollars. Not a few.


--------------------


Extras: Filter Print Post Top
Offlinedontknow
It's all in the reflex


Registered: 07/05/13
Posts: 3,889
Last seen: 7 years, 3 months
Re: School me on how to drill a holes in a glass bottle [Re: Shroomism]
    #19046680 - 10/28/13 03:36 PM (10 years, 3 months ago)

The waterpipes at the places near me are around $100 for the simplest ones


--------------------
:box:

The discerning heart seeks knowledge, but the mouth of a fool feeds on folly. -Proverbs 15:14

:tripping2: :shroomer:  :trippinballs: :shroomin:

“Imagination is everything. It is the preview of Life’s coming attractions.”
Albert Einstein


Extras: Filter Print Post Top
OfflineHeyImShroomy
Shaman
Male User Gallery


Registered: 08/18/12
Posts: 516
Loc: The Mitten
Last seen: 4 years, 3 months
Re: School me on how to drill a holes in a glass bottle [Re: dontknow]
    #19046705 - 10/28/13 03:41 PM (10 years, 3 months ago)

You need a diamond bit drill bit. That's all there is to it. No metal is hard enough to drill through glass, but diamond will go through it in 5-10 minutes.

Doesn't matter the type of drill or speed either. Just as long as it's a diamond bit.


--------------------
BrehBrehBreh  :werewolf: :frenchie:


Extras: Filter Print Post Top
OfflineKing Klick
That Guy Everyone Knows
Male User Gallery


Registered: 11/13/11
Posts: 7,267
Last seen: 6 months, 30 days
Re: School me on how to drill a holes in a glass bottle [Re: mpd]
    #19046737 - 10/28/13 03:45 PM (10 years, 3 months ago)

Quote:

mpd said:
You can go down to the local headshop and get a bong for a few dollars.  Surely that will not break the bank.



Buildabongs are more fun.


--------------------
Your god is dead, and I killed him.

When you’re lost, here I am. Forever with your soul



Extras: Filter Print Post Top
Offlinelifeiswhatyoumake
Trance in my sig n blood
Male User Gallery


Registered: 09/30/11
Posts: 16,712
Last seen: 12 hours, 3 minutes
Re: School me on how to drill a holes in a glass bottle [Re: fee] * 1
    #19046764 - 10/28/13 03:52 PM (10 years, 3 months ago)

Quote:

fee said:
Yeah I do believe so.

I know you can drill and even cut glass bottles with a dremal and the right bits so I don't see when simple can't be done with a screw gun and the right bit and technique. Hence why this thread was created.









Quote:

King Klick said:
You need a glass drill bit that you can get at most hardware stores. Look at soundrones how to drill glass. He does it for bongs.



Awesome thank you.






... get ready for Tymotseuz3 to edit your post like he did in this thread: http://www.shroomery.org/forums/showflat.php/Number/19044262


Apparently the picture in this other thread wasn't relevant to the thread, which seems to be the case with your naked girl picture in this thread.

I don't mean to bring down this thread, I'm just being realistic.


--------------------
:rave::rave::rave: I dropped a trance track "Peace Love & Trance": https://www.youtube.com/watch?v=M4uQBM-mRYU ; :raver2::raver2::raver2::raveface:


Extras: Filter Print Post Top
InvisibleKhii Khwaay
black tooth grin

Registered: 04/16/12
Posts: 2,277
Re: School me on how to drill a holes in a glass bottle [Re: fee]
    #19046776 - 10/28/13 03:54 PM (10 years, 3 months ago)

If you can do with only one hole, and you don't care if it's a bit ragged, you can just slip a dime into the bottle, and then grab it by the neck and flick it sharply downwards. It shoukd break a hole out near the bottom. It might take a few tries to get it.

That's how we used to make our BT bottles back in the day.


Extras: Filter Print Post Top
Invisiblebadchad
Mad Scientist

Registered: 03/02/05
Posts: 13,372
Re: School me on how to drill a holes in a glass bottle [Re: fee]
    #19047136 - 10/28/13 04:56 PM (10 years, 3 months ago)

As others have mentioned, get glass/tile bit from the hardware store for like $10.  It'll basically just grind away the glass like a sander. 

I do the exact thing you mentioned:  Drill a hole into the side of the bottle to make an incense burner.  I give them to friends for holiday gifts etc.  You can always find interesting bottles for a buck or two at garage sales as well.

I've found though, that you need much bigger than 1/8.  The holes I drill end up being nearly 1/2" diameter.  You may get different results.  Good luck.


--------------------
...the whole experience is (and is as) a profound piece of knowledge.  It is an indellible experience; it is forever known.  I have known myself in a way I doubt I would have ever occurred except as it did.

Smith, P.  Bull. Menninger Clinic (1959) 23:20-27; p. 27.

...most subjects find the experience valuable, some find it frightening, and many say that is it uniquely lovely.

Osmond, H.  Annals, NY Acad Science (1957) 66:418-434; p.436


Extras: Filter Print Post Top
Invisiblefee
Im he who is the
 User Gallery

Registered: 01/16/03
Posts: 18,238
Loc: amsterdam
Re: School me on how to drill a holes in a glass bottle [Re: badchad]
    #19047337 - 10/28/13 05:22 PM (10 years, 3 months ago)

Would you kindly explain how you go about doing it your way.

It would be much appreciated.


--------------------

blankk said to fee:
btw you're a total fucking psychedelic pimp
Turtletotem said:
I want to become a sun worshipper, so next time an atheist smugly asks me where god is, I can point smugly at the sun and laugh my ass off.

Then I drive away in my solar powered piece of shit car, cool stuff man.

And then I go kill a bitch because the flaming orb in the sky told me to do so, and I don't know, oppress a few minorities here and there in the name of nuclear fusion?

Religion is fun.


Extras: Filter Print Post Top
Invisiblebadchad
Mad Scientist

Registered: 03/02/05
Posts: 13,372
Re: School me on how to drill a holes in a glass bottle [Re: fee]
    #19047538 - 10/28/13 05:47 PM (10 years, 3 months ago)

Quote:

fee said:
Would you kindly explain how you go about doing it your way.

It would be much appreciated.




Honestly, its as simple as you'd expect.  I went to home depot and bought a bit like this. or something similar.
Here's the most recent I did.  This is a large wine bottle, (double the size of a standard 750mL).  The hole is 1/2", and about 5 inches up from the base.  When I stick an incense in the top, the tip hangs at just about the hole.

The only issue is getting the hole started.  The bit tends to "jump" around on the smooth glass.  A lot.  I usually clamp my bottle and/or affix to something.  Takes a lot more pressure than I thought too.  Not like drilling wood at all.


--------------------
...the whole experience is (and is as) a profound piece of knowledge.  It is an indellible experience; it is forever known.  I have known myself in a way I doubt I would have ever occurred except as it did.

Smith, P.  Bull. Menninger Clinic (1959) 23:20-27; p. 27.

...most subjects find the experience valuable, some find it frightening, and many say that is it uniquely lovely.

Osmond, H.  Annals, NY Acad Science (1957) 66:418-434; p.436


Extras: Filter Print Post Top
InvisibleSalomon
ಠ︵ಠ balance ಠ_ಠ weaver ಠ‿ಠ
Male
Registered: 01/17/09
Posts: 25,128
Loc: America, FUCK YEAH Flag
Re: School me on how to drill a holes in a glass bottle [Re: badchad]
    #19047544 - 10/28/13 05:48 PM (10 years, 3 months ago)

you can also cut glass with heat:themoreyouknow:


--------------------
EVERYTHING EVENTUALLY BECOMES A DESERT



Extras: Filter Print Post Top
InvisibleKhii Khwaay
black tooth grin

Registered: 04/16/12
Posts: 2,277
Re: School me on how to drill a holes in a glass bottle [Re: badchad]
    #19047656 - 10/28/13 06:03 PM (10 years, 3 months ago)

Quote:

badchad said:

The only issue is getting the hole started.  The bit tends to "jump" around on the smooth glass.  A lot.  I usually clamp my bottle and/or affix to something.  Takes a lot more pressure than I thought too.  Not like drilling wood at all.




You could probably rough up the glass with a bit of emery cloth on your finger to get the bit started.


Extras: Filter Print Post Top
Offlinelifeiswhatyoumake
Trance in my sig n blood
Male User Gallery


Registered: 09/30/11
Posts: 16,712
Last seen: 12 hours, 3 minutes
Re: School me on how to drill a holes in a glass bottle [Re: Salomon]
    #19047845 - 10/28/13 06:34 PM (10 years, 3 months ago)

and water.


--------------------
:rave::rave::rave: I dropped a trance track "Peace Love & Trance": https://www.youtube.com/watch?v=M4uQBM-mRYU ; :raver2::raver2::raver2::raveface:


Extras: Filter Print Post Top
Invisiblethe mad machinest
Medicine Man
Male User Gallery


Registered: 04/18/13
Posts: 4,249
Loc: parallel universe #420
Re: School me on how to drill a holes in a glass bottle [Re: lifeiswhatyoumake]
    #19047940 - 10/28/13 06:51 PM (10 years, 3 months ago)

diamond or carbide bits will work using a dremel tool.
carbide takes a Lil longer,
the bits look nothing like regular wood or metal drill bits,

I suggest using some sort of coolant runnin over the glass as you cut to remove chip build up and keep the glass and bit cool or it will be more prone to shattering...
water will work ok for this.


--------------------
:hummer:

:trees::trees:

:aweyeah::trippinbawelz::awecid:
.         



         
             
             
                                              :redneck::tentjump:                         :hole:


Extras: Filter Print Post Top
Invisiblepsi
TOAST N' JAM
Male User Gallery

Registered: 09/05/99
Posts: 31,456
Loc: 613 Flag
Re: School me on how to drill a holes in a glass bottle [Re: fee]
    #19047988 - 10/28/13 06:58 PM (10 years, 3 months ago)

If you want to go the quick and dirty route, you can make a hole in the base of the bottle's side by putting a coin inside it and sort of swinging it and stopping the motion abruptly. Hard to describe but it works. This is done for making BT bottles, you put a cigarette with a little piece of hash on the cherry into the bottom and take the hit out of the top.


Extras: Filter Print Post Top
Offlineshortpork
Stranger
Male User Gallery


Registered: 01/06/11
Posts: 276
Last seen: 7 years, 9 months
Re: School me on how to drill a holes in a glass bottle [Re: psi]
    #19048031 - 10/28/13 07:05 PM (10 years, 3 months ago)

Buy a glass bit put it in a drill, put the bottle in a vice, start drilling slowly andkeep water on it. Drill a little then let up, then drill a little n let up, repeat while keeping cool with water. Also keep the bit perpendicular to the bottle. Peace


--------------------
It's all a lie. Everything's alive.


Extras: Filter Print Post Top
Invisiblefee
Im he who is the
 User Gallery

Registered: 01/16/03
Posts: 18,238
Loc: amsterdam
Re: School me on how to drill a holes in a glass bottle [Re: shortpork]
    #19048065 - 10/28/13 07:10 PM (10 years, 3 months ago)

Duct tape wont clogg this type of bit will it?

Because if I put like two or three layers over the hole site and drill through the tape into the bottle then the tape with hold the bit from being sliding cunt face.


--------------------

blankk said to fee:
btw you're a total fucking psychedelic pimp
Turtletotem said:
I want to become a sun worshipper, so next time an atheist smugly asks me where god is, I can point smugly at the sun and laugh my ass off.

Then I drive away in my solar powered piece of shit car, cool stuff man.

And then I go kill a bitch because the flaming orb in the sky told me to do so, and I don't know, oppress a few minorities here and there in the name of nuclear fusion?

Religion is fun.


Extras: Filter Print Post Top
InvisibleKhii Khwaay
black tooth grin

Registered: 04/16/12
Posts: 2,277
Re: School me on how to drill a holes in a glass bottle [Re: Khii Khwaay]
    #19048089 - 10/28/13 07:12 PM (10 years, 3 months ago)

Quote:

Khii Khwaay said:
If you can do with only one hole, and you don't care if it's a bit ragged, you can just slip a dime into the bottle, and then grab it by the neck and flick it sharply downwards. It shoukd break a hole out near the bottom. It might take a few tries to get it.

That's how we used to make our BT bottles back in the day.





Quote:

psi said:
If you want to go the quick and dirty route, you can make a hole in the base of the bottle's side by putting a coin inside it and sort of swinging it and stopping the motion abruptly. Hard to describe but it works. This is done for making BT bottles, you put a cigarette with a little piece of hash on the cherry into the bottom and take the hit out of the top.




I think BTs are an eastern canadian thing.


Extras: Filter Print Post Top
Invisiblethe mad machinest
Medicine Man
Male User Gallery


Registered: 04/18/13
Posts: 4,249
Loc: parallel universe #420
Re: School me on how to drill a holes in a glass bottle [Re: shortpork]
    #19048098 - 10/28/13 07:13 PM (10 years, 3 months ago)

Quote:

aZipoftheTRIP said:
Buy a glass bit put it in a drill, put the bottle in a vice, wrap the bottle in a rag or set a rag in the vice, metal on glass is bad news:peace: start drilling slowly andkeep water on it. Drill a little then let up, then drill a little n let up, repeat while keeping cool with water. Also keep the bit perpendicular to the bottle. Peace




duct tape :thumbup:

just make sure to run water over the work area..


--------------------
:hummer:

:trees::trees:

:aweyeah::trippinbawelz::awecid:
.         



         
             
             
                                              :redneck::tentjump:                         :hole:


Extras: Filter Print Post Top
Invisiblepsi
TOAST N' JAM
Male User Gallery

Registered: 09/05/99
Posts: 31,456
Loc: 613 Flag
Re: School me on how to drill a holes in a glass bottle [Re: Khii Khwaay]
    #19048145 - 10/28/13 07:18 PM (10 years, 3 months ago)

Quote:

Khii Khwaay said:
Quote:

Khii Khwaay said:
If you can do with only one hole, and you don't care if it's a bit ragged, you can just slip a dime into the bottle, and then grab it by the neck and flick it sharply downwards. It shoukd break a hole out near the bottom. It might take a few tries to get it.

That's how we used to make our BT bottles back in the day.





Quote:

psi said:
If you want to go the quick and dirty route, you can make a hole in the base of the bottle's side by putting a coin inside it and sort of swinging it and stopping the motion abruptly. Hard to describe but it works. This is done for making BT bottles, you put a cigarette with a little piece of hash on the cherry into the bottom and take the hit out of the top.




I think BTs are an eastern canadian thing.




Missed that you wrote that already, I just kind of skimmed the thread. Yeah I wonder how widespread the technique and/or name is. The tobacco smoke is kind of gross but otherwise it works well, kind of a poor man's vape.


Extras: Filter Print Post Top
Invisiblefee
Im he who is the
 User Gallery

Registered: 01/16/03
Posts: 18,238
Loc: amsterdam
Re: School me on how to drill a holes in a glass bottle [Re: fee]
    #19048149 - 10/28/13 07:18 PM (10 years, 3 months ago)

Quote:

fee said:
Duct tape wont clogg this type of bit will it?

Because if I put like two or three layers over the hole site and drill through the tape into the bottle then the tape with hold the bit from being sliding cunt face.




--------------------

blankk said to fee:
btw you're a total fucking psychedelic pimp
Turtletotem said:
I want to become a sun worshipper, so next time an atheist smugly asks me where god is, I can point smugly at the sun and laugh my ass off.

Then I drive away in my solar powered piece of shit car, cool stuff man.

And then I go kill a bitch because the flaming orb in the sky told me to do so, and I don't know, oppress a few minorities here and there in the name of nuclear fusion?

Religion is fun.


Extras: Filter Print Post Top
Invisiblethe mad machinest
Medicine Man
Male User Gallery


Registered: 04/18/13
Posts: 4,249
Loc: parallel universe #420
Re: School me on how to drill a holes in a glass bottle [Re: the mad machinest]
    #19048175 - 10/28/13 07:21 PM (10 years, 3 months ago)

Quote:

fee said:
Quote:

fee said:
Duct tape wont clogg this type of bit will it?

Because if I put like two or three layers over the hole site and drill through the tape into the bottle then the tape with hold the bit from being sliding cunt face.






Quote:

the mad machinest said:
Quote:

aZipoftheTRIP said:
Buy a glass bit put it in a drill, put the bottle in a vice, wrap the bottle in a rag or set a rag in the vice, metal on glass is bad news:peace: start drilling slowly andkeep water on it. Drill a little then let up, then drill a little n let up, repeat while keeping cool with water. Also keep the bit perpendicular to the bottle. Peace




duct tape :thumbup:

just make sure to run water over the work area..




--------------------
:hummer:

:trees::trees:

:aweyeah::trippinbawelz::awecid:
.         



         
             
             
                                              :redneck::tentjump:                         :hole:


Extras: Filter Print Post Top
Invisiblefee
Im he who is the
 User Gallery

Registered: 01/16/03
Posts: 18,238
Loc: amsterdam
Re: School me on how to drill a holes in a glass bottle [Re: the mad machinest]
    #19048190 - 10/28/13 07:23 PM (10 years, 3 months ago)

Ok I guess that means it wont log the bit then?

Because duct tape will sure as shit clog wood and metal drill bits.


--------------------

blankk said to fee:
btw you're a total fucking psychedelic pimp
Turtletotem said:
I want to become a sun worshipper, so next time an atheist smugly asks me where god is, I can point smugly at the sun and laugh my ass off.

Then I drive away in my solar powered piece of shit car, cool stuff man.

And then I go kill a bitch because the flaming orb in the sky told me to do so, and I don't know, oppress a few minorities here and there in the name of nuclear fusion?

Religion is fun.


Extras: Filter Print Post Top
Offlineshortpork
Stranger
Male User Gallery


Registered: 01/06/11
Posts: 276
Last seen: 7 years, 9 months
Re: School me on how to drill a holes in a glass bottle [Re: fee]
    #19048209 - 10/28/13 07:25 PM (10 years, 3 months ago)

Use the vice n rag method if possible, i feel it would be easier
Peace


--------------------
It's all a lie. Everything's alive.


Extras: Filter Print Post Top
Invisiblethe mad machinest
Medicine Man
Male User Gallery


Registered: 04/18/13
Posts: 4,249
Loc: parallel universe #420
Re: School me on how to drill a holes in a glass bottle [Re: fee]
    #19048220 - 10/28/13 07:26 PM (10 years, 3 months ago)

I've had no issues personally using duct tape IME...

I actually don't use tape any more cause I spot drill first with a dremel using a carbide endmill then the glass drill sits right in the small divot created and keeps the bit from walking..

also let the tool do the work. don't apply too much pressure on the vice or while drilling.
really you're chipping away as opposed to cutting the glass..


--------------------
:hummer:

:trees::trees:

:aweyeah::trippinbawelz::awecid:
.         



         
             
             
                                              :redneck::tentjump:                         :hole:


Extras: Filter Print Post Top
Invisiblefee
Im he who is the
 User Gallery

Registered: 01/16/03
Posts: 18,238
Loc: amsterdam
Re: School me on how to drill a holes in a glass bottle [Re: the mad machinest]
    #19048231 - 10/28/13 07:27 PM (10 years, 3 months ago)

Sweet thank you


--------------------

blankk said to fee:
btw you're a total fucking psychedelic pimp
Turtletotem said:
I want to become a sun worshipper, so next time an atheist smugly asks me where god is, I can point smugly at the sun and laugh my ass off.

Then I drive away in my solar powered piece of shit car, cool stuff man.

And then I go kill a bitch because the flaming orb in the sky told me to do so, and I don't know, oppress a few minorities here and there in the name of nuclear fusion?

Religion is fun.


Extras: Filter Print Post Top
InvisibleKhii Khwaay
black tooth grin

Registered: 04/16/12
Posts: 2,277
Re: School me on how to drill a holes in a glass bottle [Re: psi] * 1
    #19048292 - 10/28/13 07:36 PM (10 years, 3 months ago)

If the person brewing the bots is good, they can get the cigarette smoke to layer on top of the hash, and then you can gently blow it out of the top of the bottle before you take the toke. It's a pretty ghetto looking way to smoke hash.

It's funny, somebody posts a hole-in-bottle question and the two canadians that chime in are all "stick a coin in it and shake! bots, bro!" lol


Extras: Filter Print Post Top
Offlineshortpork
Stranger
Male User Gallery


Registered: 01/06/11
Posts: 276
Last seen: 7 years, 9 months
Re: School me on how to drill a holes in a glass bottle [Re: the mad machinest]
    #19048339 - 10/28/13 07:44 PM (10 years, 3 months ago)

Quote:

the mad machinest said:
also let the tool do the work. don't apply too much pressure on the vice or while drilling.
really you're chipping away as opposed to cutting the glass..



this


--------------------
It's all a lie. Everything's alive.


Extras: Filter Print Post Top
InvisibleShins
Fun guy
Male User Gallery


Registered: 09/15/04
Posts: 16,337
Re: School me on how to drill a holes in a glass bottle [Re: shortpork]
    #19048515 - 10/28/13 08:10 PM (10 years, 3 months ago)

Last I checked glass usually has a hardness around 5.  A regular drill bit should be around 6 - 6.5 so I don't think youbneed a special bit.

I would start with a small bit and work my way up to larger ones.


--------------------
http://yourlogicalfallacyis.com/


Extras: Filter Print Post Top
Invisiblefee
Im he who is the
 User Gallery

Registered: 01/16/03
Posts: 18,238
Loc: amsterdam
Re: School me on how to drill a holes in a glass bottle [Re: Shins]
    #19048570 - 10/28/13 08:16 PM (10 years, 3 months ago)

A regular bit chews and I think chewing glass at high rpms may not end well.


--------------------

blankk said to fee:
btw you're a total fucking psychedelic pimp
Turtletotem said:
I want to become a sun worshipper, so next time an atheist smugly asks me where god is, I can point smugly at the sun and laugh my ass off.

Then I drive away in my solar powered piece of shit car, cool stuff man.

And then I go kill a bitch because the flaming orb in the sky told me to do so, and I don't know, oppress a few minorities here and there in the name of nuclear fusion?

Religion is fun.


Extras: Filter Print Post Top
OfflineLuSiD enthusiast
Stranger

Registered: 03/14/13
Posts: 4,325
Last seen: 4 years, 9 months
Re: School me on how to drill a holes in a glass bottle [Re: Shins]
    #19048583 - 10/28/13 08:18 PM (10 years, 3 months ago)

use a sanded drillbit, and hold the bottle under warm water and drill into where the water runs.


--------------------
I'm addicted to coke, weed, booze, ludes and speed.
Not LSD, you can't get addicted to LSD, it was built by scientists.

I ain't got no demons that gonna get woke.


In erowid we trust.

Just take your damn pills and don't ask any questions, you'll be fine.


Extras: Filter Print Post Top
OfflineKbolt
Thrasher
Male
Registered: 09/11/13
Posts: 76
Last seen: 9 years, 9 months
Re: School me on how to drill a holes in a glass bottle [Re: fee]
    #19048641 - 10/28/13 08:27 PM (10 years, 3 months ago)

Quote:

fee said:
So I need to drill either a bunch of tiny 1/8" holes or if the task doesn't get more difficult when making bigger holes then a few 3/8" would be nice.

So I believe the best incense burner is a glass beverage bottle.
Just attach a key ring to the stick of incense and drop it cherry down in the bottle.

You need a large mouth bottle or drill hole in the glass so oxygen can enter.
A friend was so making some pipes outa shot glasses he was puting it under water n da bath tub n useing da drill, but for sure keep strait,n slow. The pro machines use water jets with the drill
These holes don't need to be pretty just functional.

Can I do this with a screw gun?


The only thing I know it you put a few layers of tape where your going to drill. I'm assuming that's to hold you straight and possibly it it chips it contains it :shrug:


Anyway any positive feed back is very appreciated and comedic foolery is encouraged as long as your funny. Bad attempts at fucking off is not tolerated. You know who you are I dont know who you are but I'm sure you do




Extras: Filter Print Post Top
Invisiblefee
Im he who is the
 User Gallery

Registered: 01/16/03
Posts: 18,238
Loc: amsterdam
Re: School me on how to drill a holes in a glass bottle [Re: Kbolt]
    #19048657 - 10/28/13 08:29 PM (10 years, 3 months ago)

Kbolt to the rescue.

Thank you my friend


--------------------

blankk said to fee:
btw you're a total fucking psychedelic pimp
Turtletotem said:
I want to become a sun worshipper, so next time an atheist smugly asks me where god is, I can point smugly at the sun and laugh my ass off.

Then I drive away in my solar powered piece of shit car, cool stuff man.

And then I go kill a bitch because the flaming orb in the sky told me to do so, and I don't know, oppress a few minorities here and there in the name of nuclear fusion?

Religion is fun.


Extras: Filter Print Post Top
OfflineKbolt
Thrasher
Male
Registered: 09/11/13
Posts: 76
Last seen: 9 years, 9 months
Re: School me on how to drill a holes in a glass bottle [Re: fee]
    #19048692 - 10/28/13 08:35 PM (10 years, 3 months ago)

Yeah screw gun works but has to be dimaund cut bit , hold glass under water while drilling .Fee


Extras: Filter Print Post Top
Invisiblethe mad machinest
Medicine Man
Male User Gallery


Registered: 04/18/13
Posts: 4,249
Loc: parallel universe #420
Re: School me on how to drill a holes in a glass bottle [Re: Kbolt]
    #19048750 - 10/28/13 08:48 PM (10 years, 3 months ago)

Quote:

Kbolt said:
Yeah screw gun works but has to be dimaund cut bit , hold glass under water while drilling .Fee



:ban:


--------------------
:hummer:

:trees::trees:

:aweyeah::trippinbawelz::awecid:
.         



         
             
             
                                              :redneck::tentjump:                         :hole:


Extras: Filter Print Post Top
Invisiblefee
Im he who is the
 User Gallery

Registered: 01/16/03
Posts: 18,238
Loc: amsterdam
Re: School me on how to drill a holes in a glass bottle [Re: the mad machinest]
    #19048805 - 10/28/13 08:55 PM (10 years, 3 months ago)

Quote:

the mad machinest said:
Quote:

Kbolt said:
Yeah screw gun works but has to be dimaund cut bit , hold glass under water while drilling .Fee



:ban:





Ahhh haaaa its your puppet account


--------------------

blankk said to fee:
btw you're a total fucking psychedelic pimp
Turtletotem said:
I want to become a sun worshipper, so next time an atheist smugly asks me where god is, I can point smugly at the sun and laugh my ass off.

Then I drive away in my solar powered piece of shit car, cool stuff man.

And then I go kill a bitch because the flaming orb in the sky told me to do so, and I don't know, oppress a few minorities here and there in the name of nuclear fusion?

Religion is fun.


Extras: Filter Print Post Top
Invisiblethe mad machinest
Medicine Man
Male User Gallery


Registered: 04/18/13
Posts: 4,249
Loc: parallel universe #420
Re: School me on how to drill a holes in a glass bottle [Re: fee]
    #19048952 - 10/28/13 09:19 PM (10 years, 3 months ago)

yeah NO! If i was going to make a puppet account I would at least make better troll posts:shrug:


--------------------
:hummer:

:trees::trees:

:aweyeah::trippinbawelz::awecid:
.         



         
             
             
                                              :redneck::tentjump:                         :hole:


Extras: Filter Print Post Top
Invisiblefee
Im he who is the
 User Gallery

Registered: 01/16/03
Posts: 18,238
Loc: amsterdam
Re: School me on how to drill a holes in a glass bottle [Re: the mad machinest]
    #19049088 - 10/28/13 09:41 PM (10 years, 3 months ago)

Says the guy with the pink gun.


--------------------

blankk said to fee:
btw you're a total fucking psychedelic pimp
Turtletotem said:
I want to become a sun worshipper, so next time an atheist smugly asks me where god is, I can point smugly at the sun and laugh my ass off.

Then I drive away in my solar powered piece of shit car, cool stuff man.

And then I go kill a bitch because the flaming orb in the sky told me to do so, and I don't know, oppress a few minorities here and there in the name of nuclear fusion?

Religion is fun.


Extras: Filter Print Post Top
InvisibleTrentBoyett
Aspiring Mycologist
Male User Gallery


Registered: 11/29/12
Posts: 16,000
Loc: Kazakhstan
Re: School me on how to drill a holes in a glass bottle [Re: fee]
    #19049140 - 10/28/13 09:49 PM (10 years, 3 months ago)

idk if this was said yet but...

You should be fine with the duct tape because the bit doesn't have grooves like a regular drill bit.


Extras: Filter Print Post Top
Invisiblefee
Im he who is the
 User Gallery

Registered: 01/16/03
Posts: 18,238
Loc: amsterdam
Re: School me on how to drill a holes in a glass bottle [Re: TrentBoyett]
    #19049152 - 10/28/13 09:52 PM (10 years, 3 months ago)

That is exactly what I was thinking but unless you use one you don't know. If its a grinding type though I would imagine it would clog up fast like sand paper on a sticky surface


--------------------

blankk said to fee:
btw you're a total fucking psychedelic pimp
Turtletotem said:
I want to become a sun worshipper, so next time an atheist smugly asks me where god is, I can point smugly at the sun and laugh my ass off.

Then I drive away in my solar powered piece of shit car, cool stuff man.

And then I go kill a bitch because the flaming orb in the sky told me to do so, and I don't know, oppress a few minorities here and there in the name of nuclear fusion?

Religion is fun.


Extras: Filter Print Post Top
Invisiblethe mad machinest
Medicine Man
Male User Gallery


Registered: 04/18/13
Posts: 4,249
Loc: parallel universe #420
Re: School me on how to drill a holes in a glass bottle [Re: fee]
    #19049176 - 10/28/13 09:55 PM (10 years, 3 months ago)

thats what the water is for. removing chip buildup.
like I said I have had no problems with using the duct tape but I dont use it any more...

Quote:

fee said:
Says the guy with the pink gun.




yeah ya wanna make somthin of it:grin:

:rofl:


--------------------
:hummer:

:trees::trees:

:aweyeah::trippinbawelz::awecid:
.         



         
             
             
                                              :redneck::tentjump:                         :hole:


Extras: Filter Print Post Top
InvisibleTrentBoyett
Aspiring Mycologist
Male User Gallery


Registered: 11/29/12
Posts: 16,000
Loc: Kazakhstan
Re: School me on how to drill a holes in a glass bottle [Re: fee]
    #19049180 - 10/28/13 09:56 PM (10 years, 3 months ago)

I have used them many times, but never over tape.

these are the kind I use, they seem like they'd be fine and should just rip through the duct tape with no real incident...



Extras: Filter Print Post Top
InvisiblePrisoner#1
Even Dumber ThanAdvertized!
 User Gallery

Registered: 01/22/03
Posts: 193,665
Loc: Pvt. Pubfag NutSuck
Re: School me on how to drill a holes in a glass bottle [Re: fee]
    #19049364 - 10/28/13 10:28 PM (10 years, 3 months ago)

Quote:

fee said:
A regular bit chews and I think chewing glass at high rpms may not end well.





those little paddle bits so many are suggesting that you buy will do the same
you'll probably break several before one drills through

get a real diamond bit, clamp the bottle in place under a drill press, low
RPMs and a slow feed and coolant are best, the coolant is mostly for the bit


Extras: Filter Print Post Top
InvisibleAdden
I'm a teapot
Registered: 06/04/03
Posts: 39,201
Loc: Flag
Re: School me on how to drill a holes in a glass bottle [Re: fee]
    #19049683 - 10/28/13 11:24 PM (10 years, 3 months ago)

Thought this thread read "Someone school me on drilling myself in the ass", so I've been ignoring it...


Extras: Filter Print Post Top
OfflinePsilocyBen17
Pin Pornographer


Registered: 10/20/13
Posts: 3,751
Last seen: 1 year, 1 month
Re: School me on how to drill a holes in a glass bottle [Re: fee]
    #19049721 - 10/28/13 11:33 PM (10 years, 3 months ago)

Use a special drillbit like everyone has said, but do it under running water so the glass doesnt heat up and crack.


--------------------
PsilocyBen's Trade List!


Extras: Filter Print Post Top
Invisiblethe mad machinest
Medicine Man
Male User Gallery


Registered: 04/18/13
Posts: 4,249
Loc: parallel universe #420
Re: School me on how to drill a holes in a glass bottle [Re: Prisoner#1]
    #19049730 - 10/28/13 11:35 PM (10 years, 3 months ago)

Quote:

Prisoner#1 said:
Quote:

fee said:
A regular bit chews and I think chewing glass at high rpms may not end well.





those little paddle bits so many are suggesting that you buy will do the same
you'll probably break several before one drills through

get a real diamond bit, clamp the bottle in place under a drill press, low
RPMs and a slow feed and coolant are best, the coolant is mostly for the bit



I don't think he has a drill press..
also I'd like to know what you consider low rpm.? because we would always use 3000+ rpm to bore precision holes in glass.. the slower rpm's 2000- would always break the workpiece..

seems like it pops and cracks into bigger chunks and pieces at low rpm..


--------------------
:hummer:

:trees::trees:

:aweyeah::trippinbawelz::awecid:
.         



         
             
             
                                              :redneck::tentjump:                         :hole:


Extras: Filter Print Post Top
InvisibleShins
Fun guy
Male User Gallery


Registered: 09/15/04
Posts: 16,337
Re: School me on how to drill a holes in a glass bottle [Re: the mad machinest]
    #19049840 - 10/29/13 12:14 AM (10 years, 3 months ago)

What do you mean by "chewing?"  Glass is harness of 5, regular drill bit is 6+

whats the problem?    Seems like a waste of money to buy an expensive special bit.


--------------------
http://yourlogicalfallacyis.com/


Extras: Filter Print Post Top
Invisiblefee
Im he who is the
 User Gallery

Registered: 01/16/03
Posts: 18,238
Loc: amsterdam
Re: School me on how to drill a holes in a glass bottle [Re: Shins]
    #19049861 - 10/29/13 12:23 AM (10 years, 3 months ago)

Some drill bits have teeth that chew or chip away small pieces of material to cut through. The bigger the dust created by the bit is from a bigger the gap and depth of the cutting edges of the teeth.

The more brittle the the material the finer the cut you want so you don't crack it.

Glass being very brittle needs a really fine cutting edge.

A bit that grinds it with a diamond tip is about as fine as you can get in a do it yourself situation.

And grinding bits and sand paper all have their own measurement of grit.


--------------------

blankk said to fee:
btw you're a total fucking psychedelic pimp
Turtletotem said:
I want to become a sun worshipper, so next time an atheist smugly asks me where god is, I can point smugly at the sun and laugh my ass off.

Then I drive away in my solar powered piece of shit car, cool stuff man.

And then I go kill a bitch because the flaming orb in the sky told me to do so, and I don't know, oppress a few minorities here and there in the name of nuclear fusion?

Religion is fun.


Extras: Filter Print Post Top
InvisibleTrentBoyett
Aspiring Mycologist
Male User Gallery


Registered: 11/29/12
Posts: 16,000
Loc: Kazakhstan
Re: School me on how to drill a holes in a glass bottle [Re: Shins]
    #19049881 - 10/29/13 12:26 AM (10 years, 3 months ago)

Regular bits will chip/crack glass.

bits like this are actually the best for drilling glass.



they dont slide aroound or anything.


Extras: Filter Print Post Top
InvisibleShins
Fun guy
Male User Gallery


Registered: 09/15/04
Posts: 16,337
Re: School me on how to drill a holes in a glass bottle [Re: TrentBoyett]
    #19049897 - 10/29/13 12:31 AM (10 years, 3 months ago)

I'm skeptical but ok.

I bet I could do it with regular bits.


--------------------
http://yourlogicalfallacyis.com/


Extras: Filter Print Post Top
InvisibleTrentBoyett
Aspiring Mycologist
Male User Gallery


Registered: 11/29/12
Posts: 16,000
Loc: Kazakhstan
Re: School me on how to drill a holes in a glass bottle [Re: Shins]
    #19049904 - 10/29/13 12:34 AM (10 years, 3 months ago)

Probably, after destroying a few bits and breaking some glass.


Extras: Filter Print Post Top
InvisibleShins
Fun guy
Male User Gallery


Registered: 09/15/04
Posts: 16,337
Re: School me on how to drill a holes in a glass bottle [Re: TrentBoyett]
    #19049912 - 10/29/13 12:36 AM (10 years, 3 months ago)

Why would I destroy bits?


--------------------
http://yourlogicalfallacyis.com/


Extras: Filter Print Post Top
Invisiblerackem
Male User Gallery


Registered: 11/27/09
Posts: 14,024
Re: School me on how to drill a holes in a glass bottle [Re: Shins]
    #19049923 - 10/29/13 12:41 AM (10 years, 3 months ago)

shins i think your missing the small fact that regular drill bits dont have the starting point as the above pics..

with a regular drill bit just to get started you would have to apply a firm amount of pressure to get it to work. and by that time.. the glass is cracked.


--------------------


Extras: Filter Print Post Top
InvisibleShins
Fun guy
Male User Gallery


Registered: 09/15/04
Posts: 16,337
Re: School me on how to drill a holes in a glass bottle [Re: rackem]
    #19049934 - 10/29/13 12:44 AM (10 years, 3 months ago)

Come on, use your imagination a little.  There are tonnes of ways to stablize the bit.


--------------------
http://yourlogicalfallacyis.com/


Extras: Filter Print Post Top
InvisibleTrentBoyett
Aspiring Mycologist
Male User Gallery


Registered: 11/29/12
Posts: 16,000
Loc: Kazakhstan
Re: School me on how to drill a holes in a glass bottle [Re: Shins]
    #19049965 - 10/29/13 12:54 AM (10 years, 3 months ago)

Quote:

Shins said:
Why would I destroy bits?




Because glass is hard, it'll wear down the sharp point/edges.


Extras: Filter Print Post Top
Invisiblerackem
Male User Gallery


Registered: 11/27/09
Posts: 14,024
Re: School me on how to drill a holes in a glass bottle [Re: Shins]
    #19049975 - 10/29/13 12:58 AM (10 years, 3 months ago)

not the stability part.. the digging in part.


--------------------


Extras: Filter Print Post Top
InvisibleShins
Fun guy
Male User Gallery


Registered: 09/15/04
Posts: 16,337
Re: School me on how to drill a holes in a glass bottle [Re: TrentBoyett]
    #19050011 - 10/29/13 01:12 AM (10 years, 3 months ago)

Quote:

mjmihalov said:
Quote:

Shins said:
Why would I destroy bits?




Because glass is hard, it'll wear down the sharp point/edges.




Your average glass has a hardness of 5 last I checked.

In other words its relatively soft.

Id wager you could drill a few holes before it got dull.


--------------------
http://yourlogicalfallacyis.com/


Extras: Filter Print Post Top
InvisibleTrentBoyett
Aspiring Mycologist
Male User Gallery


Registered: 11/29/12
Posts: 16,000
Loc: Kazakhstan
Re: School me on how to drill a holes in a glass bottle [Re: Shins]
    #19050048 - 10/29/13 01:30 AM (10 years, 3 months ago)

I use drill bits for a living, using the right drill bit makes a job way easier. Masonay bits work good in concrete, but can barely drill through wood, even though wood is not as hard. Metal bits work good in metal, but get ruined after drilling into concrete after 2 seconds.

Drill bits work good for what they're designed for and are usually shitty at drilling through other stuff.

Like I said It would be a pain in the ass and you would ruin some bits and break some glass, theres really no way to get around it.

Steel is a 4-4.5 on mohs scale, glass is a 6-7, it wil not work well.


Extras: Filter Print Post Top
InvisibleShins
Fun guy
Male User Gallery


Registered: 09/15/04
Posts: 16,337
Re: School me on how to drill a holes in a glass bottle [Re: TrentBoyett]
    #19050058 - 10/29/13 01:37 AM (10 years, 3 months ago)

I use drill bits for a living too...  tempered steel is 6-6.5 and normal glass is 5.

I think regular metal drilling bits could work.


that is my final answer.


--------------------
http://yourlogicalfallacyis.com/


Extras: Filter Print Post Top
Invisiblerackem
Male User Gallery


Registered: 11/27/09
Posts: 14,024
Re: School me on how to drill a holes in a glass bottle [Re: Shins]
    #19050060 - 10/29/13 01:38 AM (10 years, 3 months ago)

shins.. try it.. youtube it, and lets see. gotta be honest with the number of attempts though.


--------------------


Extras: Filter Print Post Top
InvisibleTrentBoyett
Aspiring Mycologist
Male User Gallery


Registered: 11/29/12
Posts: 16,000
Loc: Kazakhstan
Re: School me on how to drill a holes in a glass bottle [Re: Shins]
    #19050069 - 10/29/13 01:42 AM (10 years, 3 months ago)

Quote:

Shins said:
I use drill bits for a living too...  tempered steel is 6-6.5 and normal glass is 5.

I think regular metal drilling bits could work.


that is my final answer.




My scale says glass is betwee 6 and 7, but it's not all about hardness anyways, it's about design.


Extras: Filter Print Post Top
InvisibleShins
Fun guy
Male User Gallery


Registered: 09/15/04
Posts: 16,337
Re: School me on how to drill a holes in a glass bottle [Re: rackem]
    #19050072 - 10/29/13 01:43 AM (10 years, 3 months ago)

Hah ain't nobody got time for that.

Do You not think its possible?


--------------------
http://yourlogicalfallacyis.com/


Extras: Filter Print Post Top
Invisiblerackem
Male User Gallery


Registered: 11/27/09
Posts: 14,024
Re: School me on how to drill a holes in a glass bottle [Re: Shins]
    #19050081 - 10/29/13 01:47 AM (10 years, 3 months ago)

impractical.

not impossible.

right tool for the right job, is the logic to my thinking here mate.


--------------------


Extras: Filter Print Post Top
InvisibleShins
Fun guy
Male User Gallery


Registered: 09/15/04
Posts: 16,337
Re: School me on how to drill a holes in a glass bottle [Re: rackem]
    #19050091 - 10/29/13 01:50 AM (10 years, 3 months ago)

True enough.  I'd prefer a special glass bit but if I were cheap and didn't want to buy one I know a carbon steel bit could work too.


--------------------
http://yourlogicalfallacyis.com/


Extras: Filter Print Post Top
Invisiblefee
Im he who is the
 User Gallery

Registered: 01/16/03
Posts: 18,238
Loc: amsterdam
Re: School me on how to drill a holes in a glass bottle [Re: TrentBoyett]
    #19050230 - 10/29/13 03:12 AM (10 years, 3 months ago)

Quote:

mjmihalov said:
Quote:

Shins said:
I use drill bits for a living too...  tempered steel is 6-6.5 and normal glass is 5.

I think regular metal drilling bits could work.


that is my final answer.




My scale says glass is betwee 6 and 7, but it's not all about hardness anyways, it's about design.





If that's all your scale says for glass it surely is bunk. There's like ten kinds of common glass types and they are not the same strength.


--------------------

blankk said to fee:
btw you're a total fucking psychedelic pimp
Turtletotem said:
I want to become a sun worshipper, so next time an atheist smugly asks me where god is, I can point smugly at the sun and laugh my ass off.

Then I drive away in my solar powered piece of shit car, cool stuff man.

And then I go kill a bitch because the flaming orb in the sky told me to do so, and I don't know, oppress a few minorities here and there in the name of nuclear fusion?

Religion is fun.


Extras: Filter Print Post Top
InvisibleTrentBoyett
Aspiring Mycologist
Male User Gallery


Registered: 11/29/12
Posts: 16,000
Loc: Kazakhstan
Re: School me on how to drill a holes in a glass bottle [Re: fee]
    #19050254 - 10/29/13 03:29 AM (10 years, 3 months ago)

Quote:

fee said:
Quote:

mjmihalov said:
Quote:

Shins said:
I use drill bits for a living too...  tempered steel is 6-6.5 and normal glass is 5.

I think regular metal drilling bits could work.


that is my final answer.




My scale says glass is betwee 6 and 7, but it's not all about hardness anyways, it's about design.





If that's all your scale says for glass it surely is bunk. There's like ten kinds of common glass types and they are not the same strength.




Idk, it had a couple different kinds of glass at other numbers, but it had just "glass" between 6 and 7, I'm guessing whatever kind they were referring was the most common type.


Extras: Filter Print Post Top
InvisiblePrisoner#1
Even Dumber ThanAdvertized!
 User Gallery

Registered: 01/22/03
Posts: 193,665
Loc: Pvt. Pubfag NutSuck
Re: School me on how to drill a holes in a glass bottle [Re: the mad machinest]
    #19050310 - 10/29/13 03:58 AM (10 years, 3 months ago)

Quote:

the mad machinest said:
Quote:

Prisoner#1 said:
Quote:

fee said:
A regular bit chews and I think chewing glass at high rpms may not end well.





those little paddle bits so many are suggesting that you buy will do the same
you'll probably break several before one drills through

get a real diamond bit, clamp the bottle in place under a drill press, low
RPMs and a slow feed and coolant are best, the coolant is mostly for the bit



I don't think he has a drill press..
also I'd like to know what you consider low rpm.? because we would always use 3000+ rpm to bore precision holes in glass.. the slower rpm's 2000- would always break the workpiece..

seems like it pops and cracks into bigger chunks and pieces at low rpm..




I only worked as a glazier for several years, drilled countless holes in
glass and mirrors which coincidentally are made of glass, low RPM is around
200-500 rpm, 3000 rpm is way too high especially with a hand drill because
people simply dont have a steady enough hand to do it. you want bits that
abrade the surface, not one that chips away at it which is why those
carbide bits break a shitload of glass


Extras: Filter Print Post Top
OfflineSunnyD
WiZarD oF LoVe
Male User Gallery


Registered: 04/29/13
Posts: 25,236
Loc: Planet earth
Last seen: 1 month, 22 days
Re: School me on how to drill a holes in a glass bottle [Re: King Klick]
    #19050426 - 10/29/13 04:58 AM (10 years, 3 months ago)

Sounddrone soundrone soundrone soundrone soundrone, ON TODAYSS! BUILD! We will be making the trumpet Gllllaaaassssss!


--------------------
:sunny::inlove::peyotespectrum::peyotespectrum::inlove::sunny:
And to everyone who thinks life is just a game,
Do you like the part you are playing?
This is the time in life I am living!
And I face each day with a smile :smile:
My music Library of Synthesizer goodness


Extras: Filter Print Post Top
InvisibleTrentBoyett
Aspiring Mycologist
Male User Gallery


Registered: 11/29/12
Posts: 16,000
Loc: Kazakhstan
Re: School me on how to drill a holes in a glass bottle [Re: SunnyD]
    #19050441 - 10/29/13 05:05 AM (10 years, 3 months ago)

What part opf ohio you from? I'm from the NE.


Extras: Filter Print Post Top
OfflineSunnyD
WiZarD oF LoVe
Male User Gallery


Registered: 04/29/13
Posts: 25,236
Loc: Planet earth
Last seen: 1 month, 22 days
Re: School me on how to drill a holes in a glass bottle [Re: TrentBoyett]
    #19050449 - 10/29/13 05:13 AM (10 years, 3 months ago)

Cinci, Dayton area. :stoner:


--------------------
:sunny::inlove::peyotespectrum::peyotespectrum::inlove::sunny:
And to everyone who thinks life is just a game,
Do you like the part you are playing?
This is the time in life I am living!
And I face each day with a smile :smile:
My music Library of Synthesizer goodness


Extras: Filter Print Post Top
InvisibleTrentBoyett
Aspiring Mycologist
Male User Gallery


Registered: 11/29/12
Posts: 16,000
Loc: Kazakhstan
Re: School me on how to drill a holes in a glass bottle [Re: SunnyD]
    #19050459 - 10/29/13 05:19 AM (10 years, 3 months ago)

I've never been down there, but I'm sure it's better than up here.


Extras: Filter Print Post Top
Jump to top Pages: 1 | 2 | 3 | 4  [ show all ]

Shop: PhytoExtractum Kratom Powder for Sale, Maeng Da Thai Kratom Leaf Powder   Kraken Kratom Red Vein Kratom   Bridgetown Botanicals CBD Concentrates


Similar ThreadsPosterViewsRepliesLast post
* A look down the rabbit hole
( 1 2 all )
dobinky 1,919 24 04/11/05 11:35 PM
by dobinky
* Putting holes in glass. AKtoker 1,702 10 04/19/05 07:09 PM
by KackleDude
* Attn Zippoz and other glass artists World Spirit 462 6 09/19/05 04:33 PM
by blissedout
* WHO likes my NEW LIGHt UP Glasses! ****PICS OF ME WITH EM ON :P
( 1 2 all )
PsillyNilly 3,180 35 03/04/05 08:09 PM
by Langerock
* This is not a drill. THIS is a drill [drill noises]. PjS 836 10 05/23/05 02:34 PM
by boO
* smoking out of plastic bottles Supernova 5,947 8 12/13/04 12:06 PM
by Mounsteen
* Patching holes in a dry wall Society 1,033 14 02/21/05 06:43 PM
by EuphoricDisaster
* My Little Stash Of Glass........
( 1 2 3 all )
kindkesey 7,305 46 05/18/04 12:11 PM
by YouEnjoyMyself

Extra information
You cannot start new topics / You cannot reply to topics
HTML is disabled / BBCode is enabled
Moderator: Entire Staff
6,290 topic views. 5 members, 36 guests and 37 web crawlers are browsing this forum.
[ Show Images Only | Sort by Score | Print Topic ]
Search this thread:

Copyright 1997-2024 Mind Media. Some rights reserved.

Generated in 0.062 seconds spending 0.012 seconds on 14 queries.