|
Some of these posts are very old and might contain outdated information. You may wish to search for newer posts instead.
|
SpencerPhillips



Registered: 08/18/12
Posts: 656
Loc: ON, Canada
Last seen: 4 days, 18 hours
|
|
The Yes was in agreement about your adorned Z+ Strain from the journal you made awhile ago?
-------------------- Come on put it up! Woooo!
|
ghostinthemist
off in the distance i stand



Registered: 08/01/13
Posts: 299
Last seen: 10 years, 4 months
|
|
Quote:
rockstaradam said:
Quote:
ghostinthemist said: I am the GYPSUM GRINDER and it's just not written like a text book otherwise it easily tells one how i made this contraption and how i use it. Therefore, it makes total sense to someone whom wants to know.
You do know you can dissolve gypsum... dont gotta be grinding that shit and ruining your coffee grinder... BAHAHA
Once again please read i use an old plastic pepper grinder. It makes it easier to dissolve and i prefer it.
-------------------- When all seems lost it has been neglected for too long to be found
|
ghostinthemist
off in the distance i stand



Registered: 08/01/13
Posts: 299
Last seen: 10 years, 4 months
|
|
Quote:
Sylus said: The Yes was in agreement about your adorned Z+ Strain from the journal you made awhile ago?
 
-------------------- When all seems lost it has been neglected for too long to be found
|
llama_police
Fun guy



Registered: 02/20/13
Posts: 516
Loc: Australia
Last seen: 7 years, 11 months
|
|
I think it's got a lot to do with your lack of grammar and sentence structure, hence why it takes a few reads to figure out exactly what you're saying. That's also why I asked if English is your second language. I'm sure you make more sense in person. Some people just have trouble conveying things in text.
|
LTSwoomz
Dweller


Registered: 02/16/13
Posts: 190
Last seen: 9 years, 3 months
|
|
I don't know if he edited it since people complained, but I had no issue figuring out what he was saying. Seemed pretty clear to me if you have a decent understanding of the lingo used here on the boards.
Don't get me wrong, I'm a fan of using nice sentence structure and proper grammar but I'm just one person with one opinion. And it falls as much on the reader to critically think about what's being presented too. That's fair.
|
mushrume man
Sadis Factory



Registered: 11/18/08
Posts: 375
Loc: PNW
Last seen: 2 years, 17 days
|
|
Quote:
dump about 2/3 to 3/4's of the bag in to said "Chicken Coffin" and close immediately. Put remaining substrate in a sterilized jar with vent holes covered with micropore tape to colonize or just leave in the bag sealed up.
Why? Wouldn't all the sub be better? Are you saving some? For what?
Also maybe put your rtv'd holes near sub level to exhaust CO2...and stop wasting rtv if it's not being heat treated.
Props tho on the greasy chicken mini mono
--------------------
|
DustJuice
▇ ▅ █ ▅ ▇ ▂ ▃ ▁ ▁ ▅ ▃ ▅ ▅ ▄ ▅ ▇


Registered: 05/01/13
Posts: 419
Last seen: 2 years, 6 months
|
|
I did feel like the tek just suddenly stopped when I was reading it. But I get it, you put BRF spawn in to an interesting container. It is cool when you find a unique container and it works. Good on ya mate. Do you have any pics of the results?
|
ghostinthemist
off in the distance i stand



Registered: 08/01/13
Posts: 299
Last seen: 10 years, 4 months
|
|
Sorry but my english is immaculate i may just be using to big of words. Like cut a hole in top or mix brf and poo and then fill and shut is that dumbed down enough for you to understand
-------------------- When all seems lost it has been neglected for too long to be found
Edited by ghostinthemist (08/23/13 08:44 AM)
|
ghostinthemist
off in the distance i stand



Registered: 08/01/13
Posts: 299
Last seen: 10 years, 4 months
|
Re: "Chicken Coffin" TEK [Re: LTSwoomz]
#18746118 - 08/23/13 08:38 AM (10 years, 5 months ago) |
|
|
Quote:
LTSwoomz said: I don't know if he edited it since people complained, but I had no issue figuring out what he was saying. Seemed pretty clear to me if you have a decent understanding of the lingo used here on the boards.
Don't get me wrong, I'm a fan of using nice sentence structure and proper grammar but I'm just one person with one opinion. And it falls as much on the reader to critically think about what's being presented too. That's fair.
This guy.....smartest most logically spoken person Ive an into on this thread so far. Even before the editing it was fine. Just was having too much fun at first
-------------------- When all seems lost it has been neglected for too long to be found
|
ghostinthemist
off in the distance i stand



Registered: 08/01/13
Posts: 299
Last seen: 10 years, 4 months
|
|
Quote:
mushrume man said:
Quote:
dump about 2/3 to 3/4's of the bag in to said "Chicken Coffin" and close immediately. Put remaining substrate in a sterilized jar with vent holes covered with micropore tape to colonize or just leave in the bag sealed up.
Why? Wouldn't all the sub be better? Are you saving some? For what?
Also maybe put your rtv'd holes near sub level to exhaust CO2...and stop wasting rtv if it's not being heat treated.
Props tho on the greasy chicken mini mono
Dosent all fit
-------------------- When all seems lost it has been neglected for too long to be found
|
Blak
SicknTwisted


Registered: 07/24/13
Posts: 57
Last seen: 9 years, 25 days
|
|
Do you mist the substrate or did you just leave it
-------------------- We Travel through Space Unknowingly
Trade List
|
Juiceh
Dabbing All Day



Registered: 09/25/12
Posts: 3,208
|
|
Quote:
ghostinthemist said: Sorry but my english is immaculate i may just be using to big of words.
LoL! I like this guy!
Quote:
ghostinthemist said: Dosent all fit
Then make more substrate and make more chicken coffins!!!
I remember years ago when I worked in a grocery store and these rotisserie chicken machines started getting popular. I always wanted to try doing something with the container. 
You mention the "center air exchange on the top of the dome." The big double thick RTVd micropore patch will provide GE during colonization but no FAE for fruiting it is far too restrictive. You could probably skip the RTVd Micropore patch because the lid seal is imperfect like a monotub. You might not get enough FAE for fruiting with only 2 little holes. I would experiment a bit with the holes in the dome. Cut some 1" holes in the dome in a monotub-like configuration and try the tape for colonization and polyfill for fruiting setup. In a monotub kinda setup as long as you don't put holes in the top of the dome you could probably stack these, I wouldn't stack them more than 2-3 high though. I'd also try a SGFC-like setup lid with 1/4" holes every 2 inches, do it just on the sides of the dome and you can probably still stack them. It would be interesting to see the results of the different setups compared to your current setup.
I think people are giving you grief over the use of RTV because you aren't pressure cooking the container or inoculating through the RTV with a needle, so using something like high temp RTV really is kinda wasteful when a piece of tape would do the same job and be much easier to remove when needed. Using RTV in the way you do is not a "precaution" it might prove to be more of a hassle when it comes time to remove it all the time. You make it sound like a piece of duct tape can't possibly do the job and that RTV is the only way to cover a hole. Its not like a piece of duct tape covering the holes will just fall off if you bump the container. LoL! Hell, I use masking tape to cover the holes in my monos, blue painters masking tape. You know, the stuff that comes off super easy? Yeah, that's all you really need dude. The only reason I'd RTV the top holes would be if I was doing a mono or SG type setup and I wanted them permanently sealed, even then I'd probably just use a glue gun.
|
mushrume man
Sadis Factory



Registered: 11/18/08
Posts: 375
Loc: PNW
Last seen: 2 years, 17 days
|
Re: Chicken Coffin grow Log [Re: Juiceh]
#18747590 - 08/23/13 02:26 PM (10 years, 5 months ago) |
|
|
Quote:
I'd probably just use a glue gun.
Thanks for explaining what I was too tired to. I forgot to mention how awesome glue guns are.
--------------------
|
llama_police
Fun guy



Registered: 02/20/13
Posts: 516
Loc: Australia
Last seen: 7 years, 11 months
|
|
Quote:
ghostinthemist said: Sorry but my english is immaculate i may just be using to too big of words.
Yeah, you're a regular fucking Einstein, like some kind of language scientist. I see I have met my match.
If I could be bothered with your retardation any further I would spend the time now to completely re-write your initial post and highlight exactly how many times you completely fucked with the English language, but I think you're just trolling now and would probably just get a kick out of it. Learn to take some constructive criticism and stop thinking you know everything, fucktard.
|
SpitballJedi
Ancient Astronaut


Registered: 10/13/12
Posts: 8,598
Loc: Nibiru
|
|
It's the most fucktarded thing I've ever read. I'm genuinely concerned about your well being.
You took a simple notion and made it complicated in instruction and construction.
I bet your directions for masturbating would leave me so confused that I would never get a nut again.
But, I still love ya anyway
-------------------- The Basics A little civility goes a long way The Noob Forum The Hammock Hangers' Forum
|
ghostinthemist
off in the distance i stand



Registered: 08/01/13
Posts: 299
Last seen: 10 years, 4 months
|
|
Quote:
llama_police said:
Quote:
ghostinthemist said: Sorry but my english is immaculate i may just be using to too big of words.
Yeah, you're a regular fucking Einstein, like some kind of language scientist. I see I have met my match.
If I could be bothered with your retardation any further I would spend the time now to completely re-write your initial post and highlight exactly how many times you completely fucked with the English language, but I think you're just trolling now and would probably just get a kick out of it. Learn to take some constructive criticism and stop thinking you know everything, fucktard.
Never said i knew everything just know exactly what im doing right now and you don't that's why i went through the trouble of making it way for your small brain to understand and im done with you PS HAVE MY FIRST PIN!
-------------------- When all seems lost it has been neglected for too long to be found
|
ghostinthemist
off in the distance i stand



Registered: 08/01/13
Posts: 299
Last seen: 10 years, 4 months
|
|
To any and all. I would like to state if you don't have the ability to read this tek just don't if it's too confusing just leave and find a different one. I don't need your flaming and you trying to call it criticism. If you have input like a few of these good people on here great if not don't use me to up your post count. Thank you.
-------------------- When all seems lost it has been neglected for too long to be found
|
ghostinthemist
off in the distance i stand



Registered: 08/01/13
Posts: 299
Last seen: 10 years, 4 months
|
Re: Chicken Coffin grow Log [Re: Juiceh]
#18751394 - 08/24/13 12:52 PM (10 years, 5 months ago) |
|
|
Quote:
Juiceh said:
Quote:
ghostinthemist said: Sorry but my english is immaculate i may just be using to big of words.
LoL! I like this guy!
Quote:
ghostinthemist said: Dosent all fit
Then make more substrate and make more chicken coffins!!!
I remember years ago when I worked in a grocery store and these rotisserie chicken machines started getting popular. I always wanted to try doing something with the container. 
You mention the "center air exchange on the top of the dome." The big double thick RTVd micropore patch will provide GE during colonization but no FAE for fruiting it is far too restrictive. You could probably skip the RTVd Micropore patch because the lid seal is imperfect like a monotub. You might not get enough FAE for fruiting with only 2 little holes. I would experiment a bit with the holes in the dome. Cut some 1" holes in the dome in a monotub-like configuration and try the tape for colonization and polyfill for fruiting setup. In a monotub kinda setup as long as you don't put holes in the top of the dome you could probably stack these, I wouldn't stack them more than 2-3 high though. I'd also try a SGFC-like setup lid with 1/4" holes every 2 inches, do it just on the sides of the dome and you can probably still stack them. It would be interesting to see the results of the different setups compared to your current setup.
I think people are giving you grief over the use of RTV because you aren't pressure cooking the container or inoculating through the RTV with a needle, so using something like high temp RTV really is kinda wasteful when a piece of tape would do the same job and be much easier to remove when needed. Using RTV in the way you do is not a "precaution" it might prove to be more of a hassle when it comes time to remove it all the time. You make it sound like a piece of duct tape can't possibly do the job and that RTV is the only way to cover a hole. Its not like a piece of duct tape covering the holes will just fall off if you bump the container. LoL! Hell, I use masking tape to cover the holes in my monos, blue painters masking tape. You know, the stuff that comes off super easy? Yeah, that's all you really need dude. The only reason I'd RTV the top holes would be if I was doing a mono or SG type setup and I wanted them permanently sealed, even then I'd probably just use a glue gun.
I will have to disagree. In my years of doing this and isolating genes in agar, I have isolated a structure that loves grow bags. The bags i use are HpOO that was sealed, autoclaved and shipped directly to me. They actually have a even smaller micropatch. I have had no problem getting 300-400 grams wet first harvest and actually usually a better harvest second flush. The micropore tape air filter i had put on is no more restrictive than the micropatch on the grow bags and i am already seeing my first pin. The isolate i use also produces stout fruits, so i was confident that I can fruit in here. Also no big holes anywhere in this small fruiting chamber. I may introduce 4 to 6 small holes in the dome once it is fully consolidated. I would do them near the substrate level and most likely 2 on each side.
-------------------- When all seems lost it has been neglected for too long to be found
|
ghostinthemist
off in the distance i stand



Registered: 08/01/13
Posts: 299
Last seen: 10 years, 4 months
|
|
Day 8 of colonization. There is 90% of the top of the substrate covered and i have my first pin! This is normal for my strain. it seems to like to pin right at the point of full colonization. Jars usually take 10 days to get to 100% but I've found HpOO works wonders and consolidates very quickly.
-------------------- When all seems lost it has been neglected for too long to be found
|
Blak
SicknTwisted


Registered: 07/24/13
Posts: 57
Last seen: 9 years, 25 days
|
|
Awesome keep us updated
-------------------- We Travel through Space Unknowingly
Trade List
|
|