Home | Community | Message Board

World Seed Supply
This site includes paid links. Please support our sponsors.


Welcome to the Shroomery Message Board! You are experiencing a small sample of what the site has to offer. Please login or register to post messages and view our exclusive members-only content. You'll gain access to additional forums, file attachments, board customizations, encrypted private messages, and much more!

Shop: Kraken Kratom Red Vein Kratom   North Spore Bulk Substrate

Jump to first unread post Pages: 1
Some of these posts are very old and might contain outdated information. You may wish to search for newer posts instead.
Offlinemthawkins
T-Mobile
Male User Gallery
Registered: 07/19/13
Posts: 181
Last seen: 9 years, 6 months
Monotub questions.. good enough for natural light ?
    #18737263 - 08/21/13 12:30 PM (10 years, 6 months ago)

I'm getting my monotube ready - I'm making 6 holes the size of small tomato soup cans (burning through the tub)... 2 on each long siDe about 4 -5 inches from bottom, with sub 3 inches full.. Then 1 on each small side (how high from bottom?)

I will be keeping my tubs under a large window that produces soft light. Will this be good?
Tips?


--------------------
“Never laugh at live dragons.”
- J.R.R Tolkien


Extras: Filter Print Post Top
OfflineTrippy_Penguin
 User Gallery


Registered: 03/18/12
Posts: 624
Last seen: 3 years, 6 months
Re: Monotub questions.. good enough for natural light ? [Re: mthawkins]
    #18737276 - 08/21/13 12:33 PM (10 years, 6 months ago)

Holes on the smaller sides go at the top.

My tubs get all their light from a window, but they sit right in the window and it's rather bright.


Extras: Filter Print Post Top
Offlinemthawkins
T-Mobile
Male User Gallery
Registered: 07/19/13
Posts: 181
Last seen: 9 years, 6 months
Re: Monotub questions.. good enough for natural light ? [Re: Trippy_Penguin]
    #18737305 - 08/21/13 12:39 PM (10 years, 6 months ago)

Cool. Is it ok to keep the holes the same size? (Tomato soup can size)
And where should I put it on the top? Few inches below top? And 5 inches above bottom for lower holes is ok? Puts it 2 inches above substrate


--------------------
“Never laugh at live dragons.”
- J.R.R Tolkien


Extras: Filter Print Post Top
OfflinePhosCap
Gratuitous Heavenly Grace
 User Gallery

Registered: 06/09/10
Posts: 975
Loc: Tartary
Last seen: 9 months, 7 days
Re: Monotub questions.. good enough for natural light ? [Re: mthawkins]
    #18737494 - 08/21/13 01:26 PM (10 years, 6 months ago)

I have my sgfc and mono in a closet with door open and southfacing window. Its somewhat shady, mush are growin and they love it. I don't think there is a difference between strong indirect light vs somewhat shadier area.


--------------------
Psychoactive Fungi of the World        TLs            Franks teks and Tips        Stonesun's..
Spitballs Quick Rye Prep


Extras: Filter Print Post Top
Offlineslh980
Average Idiot
 User Gallery

Registered: 10/07/12
Posts: 369
Last seen: 4 years, 11 months
Re: Monotub questions.. good enough for natural light ? [Re: PhosCap]
    #18737517 - 08/21/13 01:34 PM (10 years, 6 months ago)

I don't know how big a tomato soup can is to you, but my holes are 1 1/4" So if you're talking about a progresso can that's 3.5" wide... no, that is WAY too big. If you're talking about a campbells tomato paste can that's closer to 1 1/2" then yeah that's alright. But usually it's 1 1/4" - 1 1/2"

Do you own a drill? If not, go get one. Then get a 1 1/4" speedbor.


Extras: Filter Print Post Top
OfflinePhosCap
Gratuitous Heavenly Grace
 User Gallery

Registered: 06/09/10
Posts: 975
Loc: Tartary
Last seen: 9 months, 7 days
Re: Monotub questions.. good enough for natural light ? [Re: slh980]
    #18737523 - 08/21/13 01:36 PM (10 years, 6 months ago)

Quote:

slh980 said:
I don't know how big a tomato soup can is to you, but my holes are 1 1/4" So if you're talking about a progresso can that's 3.5" wide... no, that is WAY too big. If you're talking about a campbells tomato paste can that's closer to 1 1/2" then yeah that's alright. But usually it's 1 1/4" - 1 1/2"




I read a post awhile ago talkin about using a redbull can, i think they are 2" in diameter


--------------------
Psychoactive Fungi of the World        TLs            Franks teks and Tips        Stonesun's..
Spitballs Quick Rye Prep


Extras: Filter Print Post Top
Offlineslh980
Average Idiot
 User Gallery

Registered: 10/07/12
Posts: 369
Last seen: 4 years, 11 months
Re: Monotub questions.. good enough for natural light ? [Re: PhosCap]
    #18737555 - 08/21/13 01:45 PM (10 years, 6 months ago)

Quote:

phosi said:
I read a post awhile ago talkin about using a redbull can, i think they are 2" in diameter




Just measured one from the fridge, and yes, they're 2" :wink: None the less, these are monotubs, I like to limit my misting/fanning needs to the least amount possible. 2" holes vs 1 1/4" holes is a BIG difference in FAE, there is a lot more misting needed for 2" holes, whereas my 1 1/4" holes I can get by misting 1-2 times a day as opposed to 4-6 times a day with 2" holes. I work full-time so I don't always have 6 times a day to mist/fan my tub. So I use smaller holes, fan for longer when I do it, but I still only need to do it twice a day.


Extras: Filter Print Post Top
Offlinemthawkins
T-Mobile
Male User Gallery
Registered: 07/19/13
Posts: 181
Last seen: 9 years, 6 months
Re: Monotub questions.. good enough for natural light ? [Re: slh980]
    #18737650 - 08/21/13 02:04 PM (10 years, 6 months ago)

Ill just pick up a 1 1-4 drill then.

What about location of the holes? 5 inches from the bottom on long sides? What about shirt sides?


--------------------
“Never laugh at live dragons.”
- J.R.R Tolkien


Extras: Filter Print Post Top
Offlineslh980
Average Idiot
 User Gallery

Registered: 10/07/12
Posts: 369
Last seen: 4 years, 11 months
Re: Monotub questions.. good enough for natural light ? [Re: mthawkins]
    #18737663 - 08/21/13 02:08 PM (10 years, 6 months ago)

Quote:

mthawkins said:
Ill just pick up a 1 1-4 drill then.

What about location of the holes? 5 inches from the bottom on long sides? What about shirt sides?




I put my holes on the short sides literally RIGHT below the handles, make sure the latches are up, and put your speedbor as close to the handle as you can without hitting it. so maybe 2 - 2/12" down from the top of the bin. as far as the long sides (low holes) I mark a line at 4" and make sure the BOTTOM of my speedbor is lined up to it. 3-3.5" sub, .5" - 1" from the top of the sub. just high enough that my myc won't touch/colonize the polyfil haha


Extras: Filter Print Post Top
Jump to top Pages: 1

Shop: Kraken Kratom Red Vein Kratom   North Spore Bulk Substrate


Similar ThreadsPosterViewsRepliesLast post
* Medicinal/gourmet species that you can grow with monotub/SGFC layout? OericOss 1,723 11 03/05/18 05:48 PM
by grow4fun
* newbie questions Druuber 604 1 02/07/02 05:15 PM
by fresh357
* Question about strains
( 1 2 all )
GaNjAShRooM 3,253 32 03/06/02 06:07 AM
by GaNjAShRooM
* Re: ShroomGod's Hum. Tek Question
( 1 2 all )
Placebo 4,261 20 12/10/99 09:20 AM
by Anonymous
* blueing and pinched heads - grow kit question mistyblue 2,079 4 09/21/02 07:22 PM
by FATT
* Monotub grow *DELETED* Litch 626 12 03/09/18 03:14 PM
by Litch
* Monotub mycelium turning brown stash9 7,274 9 04/01/18 11:44 AM
by cephalos
* How to dial in your monotubs like a boss
( 1 2 3 4 ... 23 24 )
FrankHorrigan 242,360 475 02/16/24 08:49 PM
by betterthnbutter

Extra information
You cannot start new topics / You cannot reply to topics
HTML is disabled / BBCode is enabled
Moderator: Shroomism, george castanza, RogerRabbit, veggie, mushboy, fahtster, LogicaL Chaos, 13shrooms, Stipe-n Cap, Pastywhyte, bodhisatta, Tormato, Land Trout, A.k.a
790 topic views. 15 members, 122 guests and 33 web crawlers are browsing this forum.
[ Show Images Only | Sort by Score | Print Topic ]
Search this thread:

Copyright 1997-2024 Mind Media. Some rights reserved.

Generated in 0.022 seconds spending 0.007 seconds on 12 queries.