Home | Community | Message Board


Vesp.co, Inc.
Please support our sponsors.

Mushrooms, Mycology and Psychedelics >> Mushroom Cultivation

Welcome to the Shroomery Message Board! You are experiencing a small sample of what the site has to offer. Please login or register to post messages and view our exclusive members-only content. You'll gain access to additional forums, file attachments, board customizations, encrypted private messages, and much more!

Amazon Shop: HEPA Filter

Jump to first unread post. Pages: 1
OfflineRohypnol
Vice Figurehead

Registered: 08/04/03
Posts: 267
Last seen: 2 years, 10 months
Attaching a fan to my glovebox
    #1843440 - 08/23/03 03:12 PM (14 years, 9 months ago)

I am building a plexiglas/wood glovebox. I already have all the peices I need except for the fan and the hepa filter. The fan is going to be mounted through a peice of wood, with a hepa filter on the other end. I was wondering the following three things:

1. How would I cut my peice of wood (plywood) in the CENTER? I need to cut out a square from the center, and replace it with the fan.

2. Where would I obtain such a fan? Would Radioshack one?

3. I can't find any hepa filters for my life. I found a couple, but they are some strange cylindrical deal and deffinatly not what I need. I found something else, called a humidification filter. It doesn't say the static pressure anywhere on it. It says that it removes microbes from the air, so I guess its at least partially helpful, but I can see through it in some spots, so it can't be too good. Would a tyvek filter work?


Post Extras: Print Post  Remind Me! Notify Moderator
Invisiblekoraks
Registered: 06/02/03
Posts: 25,472
Re: Attaching a fan to my glovebox [Re: Rohypnol]
    #1843828 - 08/23/03 06:53 PM (14 years, 9 months ago)

1: Drill a hole somewhere inside the piece of wood to cut out, and saw from there with a small saw.

2: Get an old AT power supply (there are lots and lots of those around), open it and screw out the fan (cut the wires if necessary; cut them close to the PCB so you end up with nice, long leads).

3: If you can't find a decent filter, try some cotton pressed between two pieces of mesh.


Post Extras: Print Post  Remind Me! Notify Moderator
Jump to top. Pages: 1

Amazon Shop: HEPA Filter

Mushrooms, Mycology and Psychedelics >> Mushroom Cultivation

Similar ThreadsPosterViewsRepliesLast post
* Building a Glovebox? jonas 1,867 9 06/26/03 03:46 AM
by hyper_dermic
* Check out my ghetto Glovebox I made :o *PICS* Dr. Greenthumb 1,235 15 05/18/04 12:47 AM
by Dr. Greenthumb
* glovebox questions... upspoon 593 5 09/13/04 06:29 PM
by fastfred
* Let's make a glovebox! SixCee 1,923 5 02/04/03 04:37 PM
by ShroomBoarder
* ?s about micron filters and weather strip nihilist 700 3 11/30/03 10:28 PM
by nihilist
* fan system (with diagrams) lepiota 1,043 16 11/15/04 01:38 PM
by lepiota
* ?FaN oR nOt? PaPa 342 1 03/01/02 07:53 PM
by angryshroom
* glovebox? Rohypnol 1,169 15 08/22/03 10:47 AM
by Bigcaps

Extra information
You cannot start new topics / You cannot reply to topics
HTML is disabled / BBCode is enabled
Moderator: Roadkill, Magash, Shroomism, george castanza, RogerRabbit, Citric, total, FooMan, 13shrooms, stonesun, cronicr, PussyFart, Tmethyl, Pastywhyte, bodhisatta
435 topic views. 21 members, 97 guests and 8 web crawlers are browsing this forum.
[ Toggle Favorite | Print Topic | Stats ]
Search this thread:
Phytoextractum
Please support our sponsors.

Copyright 1997-2018 Mind Media. Some rights reserved.

Generated in 0.022 seconds spending 0.006 seconds on 19 queries.