|
Some of these posts are very old and might contain outdated information. You may wish to search for newer posts instead.
|
mrmonkey
Stranger

Registered: 07/03/06
Posts: 127
Last seen: 8 years, 1 month
|
Dunked 2 out of 4 casings for 3rd flush - please take a look and see if you have any suuggestions
#14586188 - 06/09/11 03:30 PM (12 years, 7 months ago) |
|
|
Hello everyone,
I had a real good first flush and as I understood I was supposed to start misting again after the flush but the problem I had was it started pinning again before i could hydrate it good or maybe it is still the first flush finishing cause it was less then 24 hours later.
The casing feels moist but the edges sucked in about 1/8th inch and the new shrooms are all growing on the edges.
Should I wait till they mature then fill in the cracks with 50/50 mix and mist the hell out of it???
Also I got a bunch of these tiny things with part of the veil open

I think what happen was when I misted a drop of water hung on the edge and pulled it open so i went and got a better sprayer with a finer mist.........is that even possible??
This second flush I only got like 84 wet grams compared to 583 wet on my first. Any suggestions on what I can do to improve the next one and do the flushes really come that fast?? Less then 48 hours?
Edited by mrmonkey (06/09/11 11:50 PM)
|
STR80180
Stranger

Registered: 12/13/10
Posts: 142
Last seen: 3 years, 8 months
|
Re: Looking for suggestions on 2nd flush - 50/50 case [Re: mrmonkey]
#14586362 - 06/09/11 04:07 PM (12 years, 7 months ago) |
|
|
Multispore will have more uneven flushes I would have rehydrated with the new pins, the reason you got such a small second flush is because the first flush pulled all of the water out of your substrate and you never replaced it I mist bottle will only do so much for you with such a large surface area of substrate alot of the water that you think your putting back into the substrate is evaporating straight of the surface, they need a good dunk between flushes
|
mrmonkey
Stranger

Registered: 07/03/06
Posts: 127
Last seen: 8 years, 1 month
|
Re: Looking for suggestions on 2nd flush - 50/50 case [Re: STR80180]
#14586571 - 06/09/11 04:56 PM (12 years, 7 months ago) |
|
|
How do you suggest dunking a casing?? I will do it tonight. I didnt know you could dunk a case.
|
mrmonkey
Stranger

Registered: 07/03/06
Posts: 127
Last seen: 8 years, 1 month
|
Re: Looking for suggestions on 2nd flush - 50/50 case [Re: mrmonkey]
#14586577 - 06/09/11 04:57 PM (12 years, 7 months ago) |
|
|
Nevermind, I made use of the search engine Thanks for the info
|
mrmonkey
Stranger

Registered: 07/03/06
Posts: 127
Last seen: 8 years, 1 month
|
Re: Looking for suggestions on 2nd flush - 50/50 case [Re: mrmonkey]
#14588208 - 06/09/11 10:48 PM (12 years, 7 months ago) |
|
|
I took two of the meatloaf pans and dunked them for 6 hours and patched the edges.
Everything look ok?? You guys see anything I can do to improve the 3rd flush?? Please remember 2 of the pans are bruised up right now i hope i have no contams.
|
|
|
You cannot start new topics / You cannot reply to topics HTML is disabled / BBCode is enabled
Moderator: Shroomism, george castanza, RogerRabbit, veggie, mushboy, fahtster, LogicaL Chaos, 13shrooms, Stipe-n Cap, Pastywhyte, bodhisatta, Tormato, Land Trout, A.k.a 291 topic views. 18 members, 223 guests and 64 web crawlers are browsing this forum.
[ Show Images Only | Sort by Score | Print Topic ] |
|