|
Some of these posts are very old and might contain outdated information. You may wish to search for newer posts instead.
|
Angel_Above
Nobody
Registered: 09/25/08
Posts: 5,348
Last seen: 7 months, 20 days
|
DMT in a Weed Vaporizer?
#11483072 - 11/18/09 11:47 PM (14 years, 4 months ago) |
|
|
By weed vaporizer, I mean the little box with the hose... is there any way to possibly smoke DMT using this little thing?
And since I have a lot of DMT at my disposal, does anyone have any insight into putting like 30 mg of DMT over a joint split between a friend or taken to the dome?
I was thinking about starting my friend off with a low dose of DMT administered this way, but he seems to think he can use the little hot box vaporizer for smoking the DMT.
Probably going to end up making "The Machine" seeing as my only options for smoking DMT are out the window (broke my bong and oil burner this week).
He also has a bong at his disposal. I never get a perfect answer for this. I'm trying to visualize myself smoking DMT out of a bong.
Parsley then DMT then more parsley on top, keep a flame over it for a few seconds to melt the DMT into the parsley, but at this point when I inhale do I let the flame touch the parsley and smoke it like weed? Or let the flame touch the parsley for a split-second, then remove the flame and inhale
Edited by Angel_Above (11/18/09 11:55 PM)
|
awesomebastard
Lost
Registered: 12/16/07
Posts: 4,891
|
Re: DMT in a Weed Vaporizer? [Re: Angel_Above]
#11483202 - 11/19/09 12:18 AM (14 years, 4 months ago) |
|
|
I know where you're from and they often sell these things at gas stations called glass roses or something it's basically a meth pipe just look around you could probably find one.
--------------------
"Absolute certainty is a privilege of uneducated minds and fanatics." ~ C.J. Keyser Mr. Cypher said: "I just tell the girls how sexy I am and their panties melt."
|
Angel_Above
Nobody
Registered: 09/25/08
Posts: 5,348
Last seen: 7 months, 20 days
|
|
I'm from IL, and I've NEVER seem something like that at a gas station.
The only oil burner I've gotten was $25 (used) and it was soooo small.
The smoke would end up being too harsh and by hit 2-3, I would end up forgetting how to work the thing because the technique isn't so easy once you're blastin off, ya know?
|
TrippyNinja
Registered: 05/13/08
Posts: 789
|
Re: DMT in a Weed Vaporizer? [Re: Angel_Above]
#11484848 - 11/19/09 11:17 AM (14 years, 4 months ago) |
|
|
I have the eagle bill vaporizer pipe. Would it work with DMT?
Heres the link to it if anybody is interested in buying one.
http://www.everyonedoesit.com/online_headshop/Eagle_Bill__Shake_amp_Vape_Pipe.cfm?iProductID=3408&iProductCategoryID=738
|
awesomebastard
Lost
Registered: 12/16/07
Posts: 4,891
|
Re: DMT in a Weed Vaporizer? [Re: Angel_Above]
#11485030 - 11/19/09 11:57 AM (14 years, 4 months ago) |
|
|
Quote:
Angel_Above said: I'm from IL, and I've NEVER seem something like that at a gas station.
Ya I know, so am I and these are behind the counter sometimes.
You have to look for them.
--------------------
"Absolute certainty is a privilege of uneducated minds and fanatics." ~ C.J. Keyser Mr. Cypher said: "I just tell the girls how sexy I am and their panties melt."
|
Angel_Above
Nobody
Registered: 09/25/08
Posts: 5,348
Last seen: 7 months, 20 days
|
|
Know of any gas stations that have sold them? I got some citgo's and speedways around me.
How much is one of those? My oil burner, which was smaller than that but with a bigger bulb, was $25 USED.
|
egobraininsane8
Mystic Wanderer
Registered: 02/07/09
Posts: 133
Last seen: 11 years, 6 months
|
Re: DMT in a Weed Vaporizer? [Re: Angel_Above]
#11486605 - 11/19/09 04:10 PM (14 years, 4 months ago) |
|
|
Id rather use a chillum or tinfoil, because if someone found my dmt pipe ie my parents or someone who doesnt do drugs they would think i smoked meth or crack. And i would have a hard time describing dmt to someone.
|
nightbringer
shaman in training
Registered: 02/21/09
Posts: 270
Last seen: 8 years, 9 months
|
|
I have a hot box vaporizer too and have thought about using it for DMT but there are two problems. First of all, this isn't the kind where you can adjust the temperature and I'm not sure at what temp DMT vaporizes, but the it may or may not be near the temp that THC vaporizes at. And more importantly, DMT would probably ruin your vapor whip. Well, maybe not ruin it, but you'll never want to use for anything but DMT again. So this would only be a good idea if you had a special whip just for DMT.
-------------------- OM MANI PADME HUM Buddha of great compassion, hold me fast in your compassion. From time without beginning, beings have wandered in Samsara, undergoing unendurable suffering. They have no other protector than you. Please bless them that they may achieve the omniscient state of buddhahood. With the power of evil karma gathered from beginningless time, sentient beings, through the force of anger, are born as hell beings and experience the suffering of heat and cold. May they all be born in your presence.
Edited by nightbringer (11/19/09 04:23 PM)
|
muistrue
Inspired by the mystery
Registered: 03/20/05
Posts: 12,899
Loc: Behind the Redwoods
|
Re: DMT in a Weed Vaporizer? [Re: Angel_Above]
#11486747 - 11/19/09 04:28 PM (14 years, 4 months ago) |
|
|
I've smoked changa out of a vaporizer many times. You can infuse DMT into any dry leaf or cannabis and it will work well in a vaporizer. And yes you will need to have a separate whip to use with DMT smoking mixtures.
--------------------
|
ThePharmahuasquero
Registered: 11/08/09
Posts: 76
Last seen: 12 years, 10 months
|
|
Angel... I have a pipe for you that my wife came up with... because of her past bad habit. Haha. But the pipe is amazing! I have had ridiculously amazing experiences with it.
I have had 0 harshness at all from the pipe. It is perfectly for DMT.
Okay, get you a pen. A nice long one will do perfectly.
Get tin foil if you can, aluminum foil works just fine.
Pull off a nice LONG sheet of it. I don't know how long, just judge.
Fold it to pen's length. When you have this done, roll the foil up onto the pen.
After you are done with that, pull the foil from the pen.
That is your pipe. To keep it from unrolling, I usually take pieces of torn off foil and tie it around the pipe.
For the screen, I stuff burn-off cleaned steel wool down into it. Just enough to fit. You will have to experiement with it.
This pipe has done amazing things for me, and I have had 0 problems breaking through with it.
I was blown away that there was no harshness..
You can push down the steel wool enough to leave a small space at the tip to load you DMT until your wool. Just head around the foil to have the crystal go into the wool and smoke it by inhaling and letting the flame go into the pipe to hit the wool.
Works amazing. Try it atleast one time, you will be amazed.
-------------------- "If the words 'life, liberty, and the pursuit of happiness' don't include the right to experiment with your own consciousness, then the Declaration of Independence isn't worth the hemp it was written on." - Terence McKenna Disclaimer: Anything said under this internet alias is completely fictional and not to be taken seriously.
|
muistrue
Inspired by the mystery
Registered: 03/20/05
Posts: 12,899
Loc: Behind the Redwoods
|
|
You're recommending people smoke DMT out of tin foil?
--------------------
|
mrgibblet
Lemon Tek Pro
Registered: 09/14/09
Posts: 980
Last seen: 8 years, 5 months
|
|
Quote:
ThePharmahuasquero said: Angel... I have a pipe for you that my wife came up with... because of her past bad habit. Haha. But the pipe is amazing! I have had ridiculously amazing experiences with it.
I have had 0 harshness at all from the pipe. It is perfectly for DMT.
Okay, get you a pen. A nice long one will do perfectly.
Get tin foil if you can, aluminum foil works just fine.
Pull off a nice LONG sheet of it. I don't know how long, just judge.
Fold it to pen's length. When you have this done, roll the foil up onto the pen.
After you are done with that, pull the foil from the pen.
That is your pipe. To keep it from unrolling, I usually take pieces of torn off foil and tie it around the pipe.
For the screen, I stuff burn-off cleaned steel wool down into it. Just enough to fit. You will have to experiement with it.
This pipe has done amazing things for me, and I have had 0 problems breaking through with it.
I was blown away that there was no harshness..
You can push down the steel wool enough to leave a small space at the tip to load you DMT until your wool. Just head around the foil to have the crystal go into the wool and smoke it by inhaling and letting the flame go into the pipe to hit the wool.
Works amazing. Try it atleast one time, you will be amazed.
Tin foil seems like it would be extremely unhealthy to vaporize with. I would never get anywhere near making a pipe with tin foil.
-------------------- "Anxiety doesn't exist. It's just your inner brain telling you that you're a pussy." jokes
|
benitoamanito
rad
Registered: 06/18/05
Posts: 827
Last seen: 12 years, 8 months
|
Re: DMT in a Weed Vaporizer? [Re: mrgibblet]
#11487142 - 11/19/09 05:16 PM (14 years, 4 months ago) |
|
|
they sell oil burners (tweak pipes) at most smoke shops just ask for oil burner.. there like 3 bucks
Edited by benitoamanito (11/19/09 05:16 PM)
|
ThePharmahuasquero
Registered: 11/08/09
Posts: 76
Last seen: 12 years, 10 months
|
|
You don't vaporizing using the TIN FOIL. The DMT is in the wool, which you heat.
You don't heat the tin foil. It is only used to tunnel the vapor into your mouth.
I don't see anything wrong with this.
Everyone complains that oil burners leave hot vapor and many, many other issues.
This doesn't have that issue at all.
There is no taste, no smoke is produced. Nothing.
You just heat the steel wool and the vapor is tunneled to your mouth with the aluminum foil.
Besides... pretty much every screen that's inside of the bowls you smoke out of are ALUMINUM! Omfg.
-------------------- "If the words 'life, liberty, and the pursuit of happiness' don't include the right to experiment with your own consciousness, then the Declaration of Independence isn't worth the hemp it was written on." - Terence McKenna Disclaimer: Anything said under this internet alias is completely fictional and not to be taken seriously.
Edited by ThePharmahuasquero (11/19/09 05:30 PM)
|
muistrue
Inspired by the mystery
Registered: 03/20/05
Posts: 12,899
Loc: Behind the Redwoods
|
|
I would still rather put the steel in some glass, never tin foil. And I don't put screens in my bowl, lol.
--------------------
|
ThePharmahuasquero
Registered: 11/08/09
Posts: 76
Last seen: 12 years, 10 months
|
Re: DMT in a Weed Vaporizer? [Re: muistrue]
#11487340 - 11/19/09 05:40 PM (14 years, 4 months ago) |
|
|
I am just saying.
I don't use tin foil. I use aluminum. I don't have a glass peice.
And you see my point with the aluminum screen thing.
I have had amazing results with this type of pipe.
Many break throughs and 0 harshness.
I can smoke out of it until I can't physically smoke any more.
The aluminum isn't heated at all. It's all the wool
-------------------- "If the words 'life, liberty, and the pursuit of happiness' don't include the right to experiment with your own consciousness, then the Declaration of Independence isn't worth the hemp it was written on." - Terence McKenna Disclaimer: Anything said under this internet alias is completely fictional and not to be taken seriously.
|
muistrue
Inspired by the mystery
Registered: 03/20/05
Posts: 12,899
Loc: Behind the Redwoods
|
|
Quote:
ThePharmahuasquero said: And you see my point with the aluminum screen thing.
Pipe screens are made from stainless steel...
--------------------
|
nightbringer
shaman in training
Registered: 02/21/09
Posts: 270
Last seen: 8 years, 9 months
|
|
quick question. Is there a particular brand or type of steel wool that's good for freebase pipes and do you have to do anything with it before smoking with it?
I have one of those straight little rose tubes but I am too lazy to blow the end out into a bulb. So I want to just make a little ghetto freebase pipe out of it.
-------------------- OM MANI PADME HUM Buddha of great compassion, hold me fast in your compassion. From time without beginning, beings have wandered in Samsara, undergoing unendurable suffering. They have no other protector than you. Please bless them that they may achieve the omniscient state of buddhahood. With the power of evil karma gathered from beginningless time, sentient beings, through the force of anger, are born as hell beings and experience the suffering of heat and cold. May they all be born in your presence.
|
muistrue
Inspired by the mystery
Registered: 03/20/05
Posts: 12,899
Loc: Behind the Redwoods
|
|
Quote:
nightbringer said: quick question. Is there a particular brand or type of steel wool that's good for freebase pipes and do you have to do anything with it before smoking with it?
Yes. Don't use steel wool (like chore boy) as it will burn. Use a spiral steel pot scrubber like this.
--------------------
|
misfitdeviate
Registered: 06/20/09
Posts: 762
Loc: ESSR
|
|
Quote:
awesomebastard said: I know where you're from and they often sell these things at gas stations called glass roses or something it's basically a meth pipe just look around you could probably find one.
i found one of those over at the head shop (in CA) and smoked some DMT a few days ago. it worked great!
|
|